Unfortunately no, I found no way to make it work. I contacted Jens and asked if there's any known issues with A300 and he said he is not aware of any. He asked to send boards back so he could test them but I haven't done it yet since I find it hard to believe I got two broken boards and I am hunting rev1.5 mobo now.
Unless, of course, whole A604n batch is faulty... How old is your A604n? Mine two are from the latest batch which were made available just recently.
Ps. Let me know if you find a way to make it work. I am considering re-capping my re-capping my A300 with tantalum caps since I've had some very slight video problems after re-capping (some caps were near impossible to solder, there could be cold joint or something).
Last edited by jarp; 02 June 2016 at 08:29.
|