View Single Post
Old 17 December 2008, 10:37   #1
Gaula92
Registered User
Gaula92's Avatar
 
Join Date: Aug 2008
Location: Spain
Posts: 464
Configure USB joystic in e-uae (OSX & Linux)

I am trying to setup an usable emulation enviroment with e-uae on mac/linux, but (among other problems) my usb-attached ps2 joystick doesn't work properly: only one button is recognized, but directional pad is not.
I see the relevant part in uaerc is:

joyport0=mouse
joyport1=joy0
input.config=0
input.1.keyboard.0.button.17=JOY1_UP
input.1.keyboard.0.button.11=JOY1_DOWN
input.1.keyboard.0.button.3=JOY1_LEFT
input.1.keyboard.0.button.4=JOY1_RIGHT
input.1.keyboard.0.button.58=JOY1_FIRE_BUTTON
input.1.keyboard.0.button.126=JOY2_UP
input.1.keyboard.0.button.125=JOY2_DOWN
input.1.keyboard.0.button.123=JOY2_LEFT
input.1.keyboard.0.button.124=JOY2_RIGHT
input.1.keyboard.0.button.59=JOY2_FIRE_BUTTON
input.2.keyboard.0.button.17=JOY1_UP
input.2.keyboard.0.button.11=JOY1_DOWN
input.2.keyboard.0.button.3=JOY1_LEFT
input.2.keyboard.0.button.4=JOY1_RIGHT
input.2.keyboard.0.button.58=JOY1_FIRE_BUTTON
input.2.keyboard.0.button.126=JOY2_UP
input.2.keyboard.0.button.125=JOY2_DOWN
input.2.keyboard.0.button.123=JOY2_LEFT
input.2.keyboard.0.button.124=JOY2_RIGHT
input.2.keyboard.0.button.62=JOY2_FIRE_BUTTON
input.3.keyboard.0.button.17=JOY1_UP
input.3.keyboard.0.button.11=JOY1_DOWN
input.3.keyboard.0.button.3=JOY1_LEFT
input.3.keyboard.0.button.4=JOY1_RIGHT
input.3.keyboard.0.button.58=JOY1_FIRE_BUTTON
input.3.keyboard.0.button.126=JOY2_UP
input.3.keyboard.0.button.125=JOY2_DOWN
input.3.keyboard.0.button.123=JOY2_LEFT
input.3.keyboard.0.button.124=JOY2_RIGHT
input.3.keyboard.0.button.62=JOY2_FIRE_BUTTON
input.4.keyboard.0.button.17=JOY1_UP
input.4.keyboard.0.button.11=JOY1_DOWN
input.4.keyboard.0.button.3=JOY1_LEFT
input.4.keyboard.0.button.4=JOY1_RIGHT
input.4.keyboard.0.button.58=JOY1_FIRE_BUTTON
input.4.keyboard.0.button.126=JOY2_UP
input.4.keyboard.0.button.125=JOY2_DOWN
input.4.keyboard.0.button.123=JOY2_LEFT
input.4.keyboard.0.button.124=JOY2_RIGHT
input.4.keyboard.0.button.62=JOY2_FIRE_BUTTON
sdl.map_raw_keys=false


So I was wondering how can I remap what JOY1_UP, JOY1_DOWN, JOY1_LEFT and JOY1_RIGHT is, so I can use this nice pad. HI-TORO totally lacks button configuration, and this input config is...strange, to say the least.
This pad works without problems with other emulators, souch as Magic Engine or Snes9X.

Any ideas?
Gaula92 is offline  
 
Page generated in 0.04740 seconds with 11 queries