View Single Post
Old 04 November 2005, 10:15   #2
move.w #$4489,$dff07e
musashi5150's Avatar
Join Date: Sep 2005
Location: Norfolk, UK
Age: 39
Posts: 2,327
Any PCMCIA 1.0/2.0 SRAM card should work. You won't need any drivers or anything like that - you should already have the tools on your workbench disk (at least the 3.x WB disks do - not completely sure if you are using WB 2.x).

There is a tool called 'PrepCard' that will allow you to format the card as disk or RAM. And that's about all there is to it.

I have a 4MB PCMCIA card for my 3.1 A600 and it works perfectly. An easy way to tell on eBay if the card is SRAM or not is to ask if it takes a battery... that's usually a good sign

If you want to buy a 2MB one this one is perfect:

I have one of these as well and it works great!
musashi5150 is offline  
Page generated in 0.04582 seconds with 11 queries