|
Hi,
Have an A500 Rev.6 with 4 empty RAM slots ...
Ordered 4 RAM chips with sockets ...
I have read many tuts and seen many shematics for RAM upgrade on this amiga, but don't get the catch what if ...
So if I add the 4 RAM chips resolder the JP2 and JP7, I will have 1MB of chip ram ...
But the expansion that I have now (512kb in expansion slot - the bottom one) will not been seen any more ???
Or will I have the 1mb chip and the 512kb slow ram ????
Is it somehow possible to make this combination ???
THx in advice, and please if it colud be possible to cover comments with some pics or tuts what do I need detailed to solder/desolder, add or remove ...
THX
Greets
Darko
|