English Amiga Board - View Single Post

drluking · 24 August 2019, 13:13

hi Alex, thanks

I have updated now the firmware of cyberstormppc to 44.71 (was 44.69) ; I want to try in this way

Your is genuine CPU 604e@233 original board; mine is not 604e V9.12546 @327) --> (??? this coluld be the problem ??? http://forum.hyperion-entertainment....hp?f=15&t=3296 )

My CDROM 32x scsi also has its own jumper for active term (SCSI ID1)

My IBM's HD uwscsi (ok in AmigaOS3.9) has not a jumper for active term (only jumper for term power), so I use a Terminator Active hardware at the end of the chain; in this IBM HD I have enabled only: Term Power jumper and Autospin Jumper and It has SCSI ID0 (prepared clean, with MBR, no partition, from a PC)
( this HD IBM 9.1Gb is DPSS-309170 model here the jumpers manual https://www.manualslib.com/manual/28...?page=7#manual ) (??? needed to Force in SE mode with a jumper ???)

I have also an other one of IBM DDRS-39130 ; not tested jet with AmigaOS4.1 install (ok in AmigaOS3.9) (I used it ages ago, and It has jumper in Force SE and in Autospin)
This model has not a jumper for Term Power (probably because It's enable as default the Term Power ?)

Then I have also a more newer HD uwscsi of 73Gb model maw3073np (ok in AmigaOS3.9 and apparently not in AmigaOS4.1FE)

If you can verify, which model of IBM HD are you using ? and some particular jumper configuration ? (for exemple SE Mode Force, ..etc..), and CDROM ? (my CDROM SCSI is HP C4506 CD writer 9600)

24 August 2019, 13:13	#10
drluking Registered User Join Date: Sep 2016 Location: Italy Posts: 225	hi Alex, thanks I have updated now the firmware of cyberstormppc to 44.71 (was 44.69) ; I want to try in this way Your is genuine CPU 604e@233 original board; mine is not 604e V9.12546 @327) --> (??? this coluld be the problem ??? http://forum.hyperion-entertainment....hp?f=15&t=3296 ) My CDROM 32x scsi also has its own jumper for active term (SCSI ID1) My IBM's HD uwscsi (ok in AmigaOS3.9) has not a jumper for active term (only jumper for term power), so I use a Terminator Active hardware at the end of the chain; in this IBM HD I have enabled only: Term Power jumper and Autospin Jumper and It has SCSI ID0 (prepared clean, with MBR, no partition, from a PC) ( this HD IBM 9.1Gb is DPSS-309170 model here the jumpers manual https://www.manualslib.com/manual/28...?page=7#manual ) (??? needed to Force in SE mode with a jumper ???) I have also an other one of IBM DDRS-39130 ; not tested jet with AmigaOS4.1 install (ok in AmigaOS3.9) (I used it ages ago, and It has jumper in Force SE and in Autospin) This model has not a jumper for Term Power (probably because It's enable as default the Term Power ?) Then I have also a more newer HD uwscsi of 73Gb model maw3073np (ok in AmigaOS3.9 and apparently not in AmigaOS4.1FE) If you can verify, which model of IBM HD are you using ? and some particular jumper configuration ? (for exemple SE Mode Force, ..etc..), and CDROM ? (my CDROM SCSI is HP C4506 CD writer 9600)