An 80Mhz Warp Engine has now replaced the 66Mhz CyberStorm Mk2.
The Radeon 9200 128MB 128bit card is also full time in here now.
The fan at the rear pushes air through the open pci slots and the grill, and fan towards the front draws that cooler air over the pci and zorro cards, and then the air hopefully finds it's way round to the back and right and out through the psu.
With the lid on the machine is stable and sits at 40C degrees at the sensor on the ICY and 37C at the sensor on the DS3231 which is in the airflow. The 060 has heatsink and fan and runs cool enough at 80mhz. The psu draws enough power to have it's fan slowly exhausting hot air out the back.
The SCSI on the WE does not work with this Mediator busboard. Not quite sure why but it appears to be an address conflict - both Wrangler and I have discovered the only way to operate a WE with the Mediator is to remove jumper L, and that seems to completely disable the SCSI ROM. It's not a massive issue as the Deneb mamages 6+ MB/s in DMA mode.