[Gaula92]

I am trying to setup an usable emulation enviroment with e-uae on mac/linux, but (among other problems) my usb-attached ps2 joystick doesn't work properly: only one button is recognized, but directional pad is not.
I see the relevant part in uaerc is:

joyport0=mouse
joyport1=joy0
input.config=0
input.1.keyboard.0.button.17=JOY1_UP
input.1.keyboard.0.button.11=JOY1_DOWN
input.1.keyboard.0.button.3=JOY1_LEFT
input.1.keyboard.0.button.4=JOY1_RIGHT
input.1.keyboard.0.button.58=JOY1_FIRE_BUTTON
input.1.keyboard.0.button.126=JOY2_UP
input.1.keyboard.0.button.125=JOY2_DOWN
input.1.keyboard.0.button.123=JOY2_LEFT
input.1.keyboard.0.button.124=JOY2_RIGHT
input.1.keyboard.0.button.59=JOY2_FIRE_BUTTON
input.2.keyboard.0.button.17=JOY1_UP
input.2.keyboard.0.button.11=JOY1_DOWN
input.2.keyboard.0.button.3=JOY1_LEFT
input.2.keyboard.0.button.4=JOY1_RIGHT
input.2.keyboard.0.button.58=JOY1_FIRE_BUTTON
input.2.keyboard.0.button.126=JOY2_UP
input.2.keyboard.0.button.125=JOY2_DOWN
input.2.keyboard.0.button.123=JOY2_LEFT
input.2.keyboard.0.button.124=JOY2_RIGHT
input.2.keyboard.0.button.62=JOY2_FIRE_BUTTON
input.3.keyboard.0.button.17=JOY1_UP
input.3.keyboard.0.button.11=JOY1_DOWN
input.3.keyboard.0.button.3=JOY1_LEFT
input.3.keyboard.0.button.4=JOY1_RIGHT
input.3.keyboard.0.button.58=JOY1_FIRE_BUTTON
input.3.keyboard.0.button.126=JOY2_UP
input.3.keyboard.0.button.125=JOY2_DOWN
input.3.keyboard.0.button.123=JOY2_LEFT
input.3.keyboard.0.button.124=JOY2_RIGHT
input.3.keyboard.0.button.62=JOY2_FIRE_BUTTON
input.4.keyboard.0.button.17=JOY1_UP
input.4.keyboard.0.button.11=JOY1_DOWN
input.4.keyboard.0.button.3=JOY1_LEFT
input.4.keyboard.0.button.4=JOY1_RIGHT
input.4.keyboard.0.button.58=JOY1_FIRE_BUTTON
input.4.keyboard.0.button.126=JOY2_UP
input.4.keyboard.0.button.125=JOY2_DOWN
input.4.keyboard.0.button.123=JOY2_LEFT
input.4.keyboard.0.button.124=JOY2_RIGHT
input.4.keyboard.0.button.62=JOY2_FIRE_BUTTON
sdl.map_raw_keys=false


So I was wondering how can I remap what JOY1_UP, JOY1_DOWN, JOY1_LEFT and JOY1_RIGHT is, so I can use this nice pad. HI-TORO totally lacks button configuration, and this input config is...strange, to say the least.
This pad works without problems with other emulators, souch as Magic Engine or Snes9X.

Any ideas?