View Single Post
Old 13 February 2015, 01:36   #5
Yulquen74
Registered User
 
Join Date: May 2013
Location: Kleppe / Norway
Posts: 218
have you checked the gary socket? if the legs of the gary chip have turned green, they should be cleaned with a nylon brush or similar.

also, since you replaced some parts, are you 100% sure you did not break any traces/vias in the process? I woud check all traces going to/from the "green" area.

sometimes even vias occasionally fail due to coorrosion damage.
Yulquen74 is offline  
 
Page generated in 0.04993 seconds with 11 queries