English Amiga Board - View Single Post - A600 will not do a warm reset - Ctrl-Amiga

kipper2k · 28 September 2009, 23:37

Solved!!

See if you can find the bad trace.... Answer is below

Ok, look to the right of the 10uf electrolytic capacitor, there are 4 empty pads, i removed the capacitor from the upper and lower pad closest to the capacitor. look at the trace coming into the top of the lower pad... the trace coming from Q511 (currently removed) to that pad is broke. Therefore the transistor would never go low and the KB_RESET would not generate a warm reset!!

YAYYYYYYYYYYYYYYYYYYYYY!!!!!!

Thanks to all for help

28 September 2009, 23:37	#18
kipper2k Registered User Join Date: Sep 2006 Location: Thunder Bay, Canada Posts: 4,323	Solved!! See if you can find the bad trace.... Answer is below Ok, look to the right of the 10uf electrolytic capacitor, there are 4 empty pads, i removed the capacitor from the upper and lower pad closest to the capacitor. look at the trace coming into the top of the lower pad... the trace coming from Q511 (currently removed) to that pad is broke. Therefore the transistor would never go low and the KB_RESET would not generate a warm reset!! YAYYYYYYYYYYYYYYYYYYYYY!!!!!! Thanks to all for help Last edited by kipper2k; 28 September 2009 at 23:46.