View Single Post
Old 21 April 2017, 18:26   #3
idrougge
Registered User
 
Join Date: Sep 2007
Location: Stockholm
Posts: 4,004
@Damion
I know that with Phase 5 SCSI adapters, you need to set a synchronous bit in the RDB to enable it for your specific drive besides enabling it with a jumper.

@macce2
The A4091 is about as fast as a drive controller can be when not mounted directly on an accelerator card. Much faster than the onboard IDE.

Hard drive size is not limited, at least if you run a filesystem supporting direct SCSI or OS3.9.
idrougge is offline  
 
Page generated in 0.04309 seconds with 11 queries