English Amiga Board - View Single Post - Amilator v 4.12-3

peo · 28 January 2019, 09:44

@FrodeSolheim, @winloze99, @nobody

FS-UAE issue, or Amilator ?

I have tested the latest released version (4.15.2) on a couple of older laptops:
Dell Latitude D410 (https://www.dell.com/downloads/globa...it_d410_en.pdf)
Dell Latitude D420 (https://www.dell.com/downloads/globa...it_d420_en.pdf)
Dell Latitude D430 (https://www.dell.com/downloads/globa...it_d430_en.pdf)
Fujitsu Siemens Amilo Li 1818, Intel T2080 1.73GHz (not mine, https://notebookspecialista.hu/files...cts/Li1818.pdf)

There is at least 1GB RAM in all these laptops.

Common to D410, D420 and Amilo is that all of them refuse to give the Amiga ZorroIII-RAM. Also, none of them are able to emulate the graphics card (uaegfx-z2, uaegfx-z3, real PicassoIV with ROM, during the installation of Picasso software the PIV card is detected, but the monitor fails to start).

Messages on my D410 and D420 on startup:
Graphics card memory size 524288 (0x80000) larger than maximum reserved 0 (0x0)
Zorro III fastmem size 4194304 (0x400000) larger than maximum reserved 0 (0x0)

Also, when emulated graphics card is enabled (D410, D420, Amilo) but not working these setups run at 30% speed compared to when the graphics_card configuration is commented out ("only" 300xA500/8.67xA4000, compared to 856xA500/24.84xA4000).

The D430 works as expected with ZIII and graphics. D410, D420 and Amilo accepts 8MB fastram (fast_memory = 8192).

Relevant section from configuration:

Code:

[fs-uae]
amiga_model = A1200
kickstart_file = /amiga/roms/kick.rom
chip_memory = 2048
cpu = 68060-NOMMU
jit_compiler = 1
zorro_iii_memory = 524288
fast_memory = 8192

bsdsocket_library = 1
uaem_write_flags=0

graphics_card = picasso-iv-z3
graphics_memory = 4096
graphics_card_rom = /amiga/roms/PIV_FLAS.BIN

#graphics_card = uaegfx-z3
#graphics_memory = 32768

The only way to get more fastram on these laptops are using the emulation of BlizzardPPC / CyberstormPPC, but then the speed drops down painfully slow (0,45xA4000) because they do not allow the jit_compiler option..

Any idea where I should start looking for what is the cause of the issue ?

28 January 2019, 09:44	#40
peo Registered User Join Date: Dec 2008 Location: Ursviken Posts: 137	@FrodeSolheim, @winloze99, @nobody FS-UAE issue, or Amilator ? I have tested the latest released version (4.15.2) on a couple of older laptops: Dell Latitude D410 (https://www.dell.com/downloads/globa...it_d410_en.pdf) Dell Latitude D420 (https://www.dell.com/downloads/globa...it_d420_en.pdf) Dell Latitude D430 (https://www.dell.com/downloads/globa...it_d430_en.pdf) Fujitsu Siemens Amilo Li 1818, Intel T2080 1.73GHz (not mine, https://notebookspecialista.hu/files...cts/Li1818.pdf) There is at least 1GB RAM in all these laptops. Common to D410, D420 and Amilo is that all of them refuse to give the Amiga ZorroIII-RAM. Also, none of them are able to emulate the graphics card (uaegfx-z2, uaegfx-z3, real PicassoIV with ROM, during the installation of Picasso software the PIV card is detected, but the monitor fails to start). Messages on my D410 and D420 on startup: Graphics card memory size 524288 (0x80000) larger than maximum reserved 0 (0x0) Zorro III fastmem size 4194304 (0x400000) larger than maximum reserved 0 (0x0) Also, when emulated graphics card is enabled (D410, D420, Amilo) but not working these setups run at 30% speed compared to when the graphics_card configuration is commented out ("only" 300xA500/8.67xA4000, compared to 856xA500/24.84xA4000). The D430 works as expected with ZIII and graphics. D410, D420 and Amilo accepts 8MB fastram (fast_memory = 8192). Relevant section from configuration: Code: [fs-uae] amiga_model = A1200 kickstart_file = /amiga/roms/kick.rom chip_memory = 2048 cpu = 68060-NOMMU jit_compiler = 1 zorro_iii_memory = 524288 fast_memory = 8192 bsdsocket_library = 1 uaem_write_flags=0 graphics_card = picasso-iv-z3 graphics_memory = 4096 graphics_card_rom = /amiga/roms/PIV_FLAS.BIN #graphics_card = uaegfx-z3 #graphics_memory = 32768 The only way to get more fastram on these laptops are using the emulation of BlizzardPPC / CyberstormPPC, but then the speed drops down painfully slow (0,45xA4000) because they do not allow the jit_compiler option.. Any idea where I should start looking for what is the cause of the issue ?