View Single Post
Old 05 February 2008, 08:43   #3
Calgor
(Amigas && Amigos)++

Calgor's Avatar
 
Join Date: Sep 2005
Location: Anrea
Posts: 999
And another way is to use the Advanced Amiga Analyzer (look up the Amiga Hardware website). There is also a software disk for this which can be used without the hardware.

The hardware will also show the voltage levels on some of the pins, which are required for some devices. Instead of that hardware, you could very carefully use a multimeter (if you have experience) or an external serial device which requires that power. The amiga owners manual should say which voltage is expected on which pins.
Calgor is offline  
 
Page generated in 0.07125 seconds with 11 queries