It's not a missing startup.ini; that gets created in RAM:T after the program has been run, probably so next time it gets relaunched it goes back to the same state.
What you need to do is go to the Expansion/KGLoad drawer and look at the error.log file. My suspicion is that you need to change the Expansion/KGLoad/s/workbench-startup file, as it has a line to assign KGLoad: to "DH0:Expansion/KGLoad", and your partition isn't called DH0:
It does state in the install instructions that your first partition has to be named DH0: for full compatibility. Although I did try and use SYS: in 99% of all links, DH0: was required in certain circumstances and this will need changing in your case.
|