Quote:
Originally Posted by Allen1
Great link Mate,
I am tempted to get my +3 out but after all this time the chances of the disk drive belt surviving is very slim.
If you are talking about the Amiga then at the scart end all the grounds can be linked together and they are required to work properly with the RGB connections etc, on the Amiga side they share a common GND so no problem as long as it is just the GND's you share in the scart connector..
|
hm, yes, but are you sure? because I noticed the blanking ground goes to LOGIC ground and there is 250 ohms between it and video GND on my A1200 (if I measured it correctly)
about +3, it takes 15min to change the belt, I do it without completely dismantling the drive. of course, finding the new belt is another story.