English Amiga Board - View Single Post - Soldering MPC603RRX300LC 300MHz PPC processor into Blizzard PPC

stachu100 · 19 January 2010, 10:08

Hi,

My last mod:

http://picasaweb.google.pl/stacho100...66MHzPPC300MHz#

[ Show youtube player ]

Initially this card was 040@25MHz/PPC@160MHz with bus speed 50MHz for PPC processor (lowest config posible).

Now it's the best config possible:
060@66MHz/PPC@300MHz with 60MHz PPC bus speed

060 CPU and 060 oscillator are socketed just in case (some BVision cards refuse to work on 66MHz).

I tried this PPC processor to work with 66MHz bus speed, but cards hung-up after 2 minutes; so I was forced to set 60MHz oscillator for PPC with x5 clock multiplier.

Just missing the heatsink+clips+5Vfan for PPC processor; I bought this card without it.
If you have it as spare I'm ready to buy

19 January 2010, 10:08	#1
stachu100 Registered User Join Date: Mar 2009 Location: Poland Posts: 339	Soldering MPC603RRX300LC 300MHz PPC processor into Blizzard PPC Hi, My last mod: http://picasaweb.google.pl/stacho100...66MHzPPC300MHz# [ Show youtube player ] Initially this card was 040@25MHz/PPC@160MHz with bus speed 50MHz for PPC processor (lowest config posible). Now it's the best config possible: 060@66MHz/PPC@300MHz with 60MHz PPC bus speed 060 CPU and 060 oscillator are socketed just in case (some BVision cards refuse to work on 66MHz). I tried this PPC processor to work with 66MHz bus speed, but cards hung-up after 2 minutes; so I was forced to set 60MHz oscillator for PPC with x5 clock multiplier. Just missing the heatsink+clips+5Vfan for PPC processor; I bought this card without it. If you have it as spare I'm ready to buy