I meant NoMemReverse, not NoFlushMem. Open WHDLoad.prefs with an editor and remove the ";", it's worth a try.
Quote:
;
; global configuration file for WHDLoad
; searched as "S:whdload.prefs"
;
; CLI-Arguments and ToolTypes will overwrite these !
;
;ButtonWait ;wait for button pressed (slave must support this)
;ChipNoCache ;disable cachebility of Chip-Memory
;CoreDumpPath=T: ;path for coredump files
;DebugKey=$5b ;rawkey code to quit with coredump (debug)
;ExecuteStartup=rx offline.rexx ;command to execute on WHDLoad startup
;ExecuteCleanup=rx online.rexx ;command to execute on WHDLoad exit
;Expert ;selects expert mode
;FreezeKey=$5d ;rawkey code to enter HrtMon/TK
;MMU ;use MMU (for 68030)
;NoAutoVec ;ignore unwanted autovector interrupts
;NoFilter ;disable audio filter
;NoFlushMem ;do not flush memory
NoMemReverse ;do not allocate memory reverse
;NoWriteCache ;disable the disk write cache
QuitKey=$5d ;rawkey code to quit
;ReadDelay=150 ;wait after reading from disk (1/50 seconds)
;RestartKey=$5c ;rawkey code to restart
;ShowRegs=SYS:Utilities/MuchMore W WL=80 WT=80 WW=582 WH=700 ;command for Show Regs
;SplashDelay=200 ;time to display splash window (1/50 seconds)
;WriteDelay=150 ;wait after saving something to disk (1/50 seconds)
|