English Amiga Board - View Single Post

Daedalus · 25 October 2022, 18:29

This is it:

http://robthenerd.com/misc/tf1260cooler.jpg

The fan is mounted on a small aluminium bracket that fits underneath the floppy drive and mounts using the spare screw hole on the side of the drive, and is directed towards the heatsink. I can't use the IDE port on the TF 1260 of course, but allowances could always be made for that too if I needed.

Sucking air out isn't likely to work well in an A1200 because there are so many ventilation spaces in the case. You'll get very little airflow over the CPU because so much of the air will come from elsewhere.

25 October 2022, 18:29	#425
Daedalus Registered User Join Date: Jun 2009 Location: Dublin, then Glasgow Posts: 6,377	This is it: http://robthenerd.com/misc/tf1260cooler.jpg The fan is mounted on a small aluminium bracket that fits underneath the floppy drive and mounts using the spare screw hole on the side of the drive, and is directed towards the heatsink. I can't use the IDE port on the TF 1260 of course, but allowances could always be made for that too if I needed. Sucking air out isn't likely to work well in an A1200 because there are so many ventilation spaces in the case. You'll get very little airflow over the CPU because so much of the air will come from elsewhere.