English Amiga Board - View Single Post - A1200 IDE issue

supaduper · 27 September 2022, 09:51

You can get the 5v from the floppy port it is the left most pin, to check if you have IDE signals working go to the Gayle chip(U5) and probe pin 13 (_IDE_CS(1) ) and see if you have a pulse signal on power up

27 September 2022, 09:51	#8
supaduper Registered User Join Date: Oct 2012 Location: Krypton Posts: 1,221	You can get the 5v from the floppy port it is the left most pin, to check if you have IDE signals working go to the Gayle chip(U5) and probe pin 13 (_IDE_CS(1) ) and see if you have a pulse signal on power up