Quote:
Originally Posted by trixster
So just to confirm - you have a second machine now, you put the mediator (or the prometheus) into the new machine, use the harddrive/sd card from the old setup... and exactly the same crashes occur when trying to use zorro III ram? Or any pci card? or any zorro 3 card?
When exactly do the crashes occur? is it just when trying to copy stuff to/from Z3 ram? Can any Warp3D games work properly? Does the machine just hang once the K1 is initilised?
Is workbench stable with just the voodoo installed and used as an RTG card?
Have you tried any other voodoo or radeon cards in conjunction with the K1?
|
That's correct. I can reproduce the issue with either VoodooMemOS (when running stuff copied to it) or just by starting the M1 with StartPPC.
I have only tried the Warp3D demos and those work properly.
Yes, rock stable. Never had an issue.
I am pretty sure I have tested everything with my Radeon 9250, but I am going to try again with it in place of the Voodoo 3.
Quote:
Originally Posted by trixster
How are the mediator logic board jumpers set?
Winsize should be closed, master should be closed and Config should be open
|
Yes, that's how it's set right now.