Quote:
Originally Posted by Dan
Please give us more information on what you want and have done.
The steps to add a harddrive are:
Start the winuae.
If the emulation is running then Press F12
if the emulation is not running, and you have the winue properties dialog up, then first load the configuration which should get a shared folder added.
|
Not sure it helps to quote WinUAE, while principals are close, it will just confuse someone who not familiar with both WinUAE and AF.
To create a "Hard drive" (which will in fact be just a file embedded in your AF machine)...
Select your machine in AF where you want to add drive
Select to edit
Go to the "Media" tab
Look in the "Disks" section... look for and remember next free name in sequence (DH2 or whatever)
In "Disks" section, select "Add"
Top of next screen.. select "Hard disk image file" from the drop down
and press "Create Blank" button
Select the size you want... and select the device name *that you remembered from step above (DH2 or whatever is free) ,, and press OK.
It should now be prefilled in the prev screen... you prob dont want change anything more.. so click OK
It should now appear in you "Disks" section of the screen,....
you can now click OK and start your emulated Amiga
After a short delay... it should appear on your Workbench as an Uninitialised drive.... so just format it.. and away you go...
Hope that helps.
Cheers
(PS... I using AF9... but think process Same/very similar for at least 8 and 7)