|
Please give us more information on what you want and have done.
The steps to add a harddrive are:
Start the winuae.
If the emulation is running then Press F12
if the emulation is not running, and you have the winue properties dialog up, then first load the configuration which should get a shared folder added.
Then click on Hardware, and on CD & Hard Drives.
Click on Add Directory or Archive
There add a device name, dh0 or dh1 or hd1 or whatever you like.
Volume label is the name as it appears on the Workbench icon, like "Ram Disk"
Path is the path to the folder which you want to share. for eg i have a
D:\Emus\WinUae\AMOS_for_Windows\AMOS
set up.
The read/write has to be checked, bootable only if you want to install workbench on it.
After this is set up, click on ok.
Then click on configurations and save it.
Then start the emulation.
That's the standard procedure with winuae. It should be somewhat similar with Amiga Forever.
If you have workbench 1.3 running, the files, which you add to the drive does not show up, until they have an .info file.
on workbench 2+ you'll need to open the drive window, and to select show all files in one of the menues.
|