I'm having problems with Roadshow TCP/IP stack and my network card.
Here is the network card I have...
https://retroready.one/products/link...12700522086470
The card should work with CNET.device (unit 0). On attempting to mount the card via AddNetworkInferace (or by double clicking the CNet mountlist in DEVS:NetworkInterfaces all I get is: could not open CNET.device unit 0 (Device/unit failed to open).
My Amiga already has CCRESET fitted via the KA21 solderless board which is here:
https://amitopia.com/gayle-reset-fix-amiga-1200-ka-21/
My PCMCIA port is working fine (I also use a CF card adapter for transfering stuff so I can rule out its a fault with the PCMCIA port). I've also tried pulling out the network card and reinserting it after rebooting. Still I get 'could not open CNET.device unit 0 (device/unit failed to open). I beginning to think the network card is knackered is their anything I can try to solve this issue?
N.B I tried launching Prepcard just to see if Workbench picks up the network card. It detects the card just fine and it's listed as a LinkSYS 10bT Intergrated PC Card (EC10T) Version 4.1. Just now need some help to get it working with RoadShow.
Hopefully somebody will have a solution.