English Amiga Board - View Single Post

Toni Wilen · 06 October 2016, 17:17

Your config is weird.

- A4000T but normal A4000 ROM. (Just change it to normal A4000)
- CD32FMV enabled. That does not make any sense.
- Strange extended and cartridge rom selections..

There is no "true to the original" option. It is only in the eye of the beholder. There are too many ways to scaling standard PAL or NTSC image to higher resolution and all of them have different trade-offs.

Switch on native fullscreen, then Filter panel and switch aspect ratio to whatever you prefer. Then adjust size multiplers or use automatic scaling. Add extra filters if needed etc..

Borders were nearly always visible (unless program used overscan), genlock video image always filled whole screen.

06 October 2016, 17:17	#4
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,534	Your config is weird. - A4000T but normal A4000 ROM. (Just change it to normal A4000) - CD32FMV enabled. That does not make any sense. - Strange extended and cartridge rom selections.. There is no "true to the original" option. It is only in the eye of the beholder. There are too many ways to scaling standard PAL or NTSC image to higher resolution and all of them have different trade-offs. Switch on native fullscreen, then Filter panel and switch aspect ratio to whatever you prefer. Then adjust size multiplers or use automatic scaling. Add extra filters if needed etc.. Borders were nearly always visible (unless program used overscan), genlock video image always filled whole screen.