Help with A500+ does not boot, white screen, blinking power led
Hi, I have a cool A500+ for repair, when receiving it, was going guru all the time, no matter what I loaded. It stays OK on boot screen for hours.
It had a previous repair of battery leak.
After inspecting a little, saw some green goo near U12 and C12, so I removed them and cleaned all, tested continuity etc.., but when putting everything back, now I get a white screen and the power led blinks, no boot anymore.
I tested Gary chip on other miggy and works OK. I replaced U12 and C12, and problem is the same.
Any ideas on what to try next?
Thanks!
|