English Amiga Board

English Amiga Board (http://eab.abime.net/index.php)
-   support.Hardware (http://eab.abime.net/forumdisplay.php?f=20)
-   -   Sourcing Updated Kickstart ROM Chips. (http://eab.abime.net/showthread.php?t=51972)

Melonfish 02 April 2010 21:39

Sourcing Updated Kickstart ROM Chips.
I'm looking at adding an IDE-CF converter/hard drive to my A600.
however, my KS-Rom appears to be 37.299 an going off several threads such as this one: http://eab.abime.net/showthread.php?t=19688
i believe i need at least 37.300 or 37.350 (which looses size limitation)
Where would i go about sourcing these chips and what is and is not compatable with my A600?
I know these noob questions :sleep you guys but your a goldmine of info and i need to tap it ;) :bowdown


Melonfish 02 April 2010 21:58

Ooh, Ooh, Ooh!
Just found a little folder with the Workbench 3.0 suite in it!
must be from my sisters A1200 (which she gave away years ago :banghead)
Am i right in saying that i should get KS 3.1 (40.xx) to run this?

Philophus 02 April 2010 22:00

kickstart 3.0 or 3.1, if you're going to upgrade its best to go 3.1.

Merlin 02 April 2010 22:02

@ Melonfish

I have a 2.05, 37.300 Kickstart chip spare from when I upgraded my A600 to 3.1.....it's yours for the postage cost.

Any interest?

All times are GMT +2. The time now is 02:23.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.

Page generated in 0.05162 seconds with 11 queries