Wanted: Micronik 6860 Busboard 4.x
 

Hi fellow EAB members,

Looking for one of these sweet busboard with 4 (v4.2) or 3 (v4.10) ISA slots.

Get in touch if you have one you would like to sell.

Thanks and Happy New Year!
-max

Hi,
I might be interested in selling my card which is in the infinitiv tower but has nothing connected to it .... (excom 1200+blizzard 1260 +SCSI adaptor)

On the other hand, I will only accept a paypal payment before shipping.

what is your location? (I'm in France)
The shipping costs will be at your expense by tracked parcel.

What price do you offer.
(I inquire near the reseller to know the value)

Hi CFOU,

Great! :-)

Yes, the Board alone is fine. PayPal also works well.

Sure, no prob to cover for shipment. I'm in Miami Beach, Florida. My brother lives in Italy, if simpler we can also ship to him and will collect there when visiting.

There is a 6860 v5.44 for sale on Amibay at 80 EUR, would that range of price + shipping be ok ?

Thanks and talk soon!
-max

I await some feedback about current value of this type of board.

I'm taking the card down tomorrow and taking some photos.
(and i would verify that the keyboard is not connected to it)

I will keep you informed, I will send you a PM with my email address if you have any other questions

https://i.imgur.com/ivreCDs.png

HI,

I have a problem :banghead


I no longer remembered that the card could be used to power the amiga (see photo).

If I sell it, the motherboard of the amiga will no longer be powered and I do not want to do a PSU hack like on my other amiga ...

sorry

No worries, fully understandable.

Would you consider swapping the v4.2 with a v5.4 ?

It's functionally the same, but has 2 PCI in place of 2 ISA.

Thanks,
-max

Read it please:
http://eab.abime.net/showpost.php?p=1031440&postcount=4

I'll verify i have micronik keyboard adpator.

Perhaps i can easly connect PSU without board 6860

Good point!

If you are planning to upgrade to Mediator, should also be possible to power through that.

I must verify i am not lost PSU termination kit:
https://i.imgur.com/cjQzGMk.png

If i can found it and boot amiga without 6860, i could sell the board ;)
(i will try tommorow, i can today)

Hello , i managed to find a psu micronik adapter in relec amiga shop last year.Have in mind that it is good to power up your micronik board using the busboard psu connector and the one found on the keyboard ribbon interface via the mentioned mikronik adapter.I do for my setup using a cyberstorm MK3 .I only had to wire a second micronik special psu connector.It is a common psu connector found in an elecronic shop.The metal parts are the same from an AT connector.I will post photos tomorrow.