English Amiga Board

English Amiga Board (http://eab.abime.net/index.php)
-   support.WinUAE (http://eab.abime.net/forumdisplay.php?f=5)
-   -   A590/2091 Rom (http://eab.abime.net/showthread.php?t=67198)

caver99 31 December 2012 11:50

A590/2091 Rom
Does anyone know what the name of the rom should be for the above controlers?
I have the 2 eprom images for both controllers but they might need to be in 1 file but do i need to buyte swap them or just copy them to 1 file?

SpeedGeek 31 December 2012 16:05

I just uploaded a complete 16KB ROM image to the Zone. The ROMs don't determine the controllers name. They just contain the 2 drivers (scsi.device and xt.device). The name is determined in software after reading the config info (from DMAC). The Showconfig name is "CBM A2091/A590 HD controller".

Toni Wilen 31 December 2012 16:10

I think OP wanted to know if WinUAE needs some specific name for rom file. It does not.

Put the rom file(s) in same directory as your KS ROMs and press rescan in paths panel and you'll see if it was detected. Both single file and odd/even format are supported.

caver99 02 January 2013 10:35

thanks for the upload i will try this later and post if i get it working or not.

craiganderson 15 March 2014 22:58

I am new to the forum. I am setting up WinUAE. It tells me I am missing

A590/A2091 SCSI Boot ROM

Would the rom mentioned earlier in the thread be the correct one? Where do I download it from?

Would anybody be able to upload it again?


emufan 15 March 2014 23:16


download a2091-7.lha - it has the splitted rom, put both in kickstart folder and "rescan roms" :)

craiganderson 16 March 2014 07:43


Originally Posted by emufan (Post 943884)

download a2091-7.lha - it has the splitted rom, put both in kickstart folder and "rescan roms" :)

thank you
problem fixed

All times are GMT +2. The time now is 11:57.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.

Page generated in 0.04178 seconds with 11 queries