English Amiga Board

English Amiga Board (http://eab.abime.net/index.php)
-   support.Hardware (http://eab.abime.net/forumdisplay.php?f=20)
-   -   A1200 dark brown SMD *ceramic* caps (http://eab.abime.net/showthread.php?t=61706)

Photon 04 November 2011 23:39

A1200 dark brown SMD *ceramic* caps
 
I'm primarily looking for the value of the dark brown ceramic ones used with 10 Ohm resistors.

Is it known? Or do I just pick any ceramic "nF" one? Threads on eab seem electrolytically prejudiced...

The reason I'm replacing this one is it's been beaten black and blue by an SMD electrolytic spasmodic one...

Specifically, it's C302 by the keyboard connector.

Wouldn't mind knowing the value of the light brown ones too :great

Loedown 05 November 2011 07:57

C302 is listed as 0.22uF or 220nF Photon, from Audio decoupling circuit.

SMT caps can have huge variances in spec even if they are the same size and also tolerances from Y5V to NPO and alike.


All times are GMT +2. The time now is 18:43.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.

Page generated in 0.04234 seconds with 11 queries