that would need to add 2 more memorychips.. and some more pins connected to the cpld.

MAYBE stephen can do a version with support for it. if anyone gives a good reason of why 128MB ram isn't enough :)

TF4060 will however have support for 256MB ram

Any estimate on the availabilty of this new firmware?

that firmware have been out for over a year

https://exxosforum.co.uk/forum/viewt...hp?f=75&t=4947

That is "Alpha" firmware, is there any plan to release a "Final" firmware?

trust me. ignore the "alpha" name. it is quite stable. there are a new that will be a tets later. but this is stable. actually much more stable than the "999" serial no version that have that weird 14MHz hack that makes it show wrong MHz etc in whichamiga

also this have 7MB/sec chipmem access that is theoretical max.

Even though I have a A4000, it has a max of 128mb on the processor slot.
The A1200 can do 256Mb!

I currently have a Warp engine 68040@40mhz, 128Mb of ram in my A3000. I run Linux on it at times. Only having the 128Mb ram on the warp makes it painful.
I have a A1200 with a Apollo 68060@50mhz, but it has a max of 32mb.
I would move the 68060 from the Apollo to the TF1260.

yes cpu slot is max 128MB. but you can add yet another 128MB as Z3 memory.
(but full CPU speed)