keyboard changed
hi guys,
i have a a500 Rev6 and the keyboard was faulty, so I replaced to a keyboard from Rev6, the problem its that the capslock begins to flash and the keyboard doesnt work. And some times it works fine. Anyone knows why? |
Hi Landex,
Quote:
Keyboard isn't resetting properly. Circuitry associated with the keyboard needs a few seconds to power-down after you switch the machine off, caps to discharge etc. Red |
ThanKs Red, but I think thats not the main problem, because when it starts OK, some times I change the disks, and when I changing it the capslock start to fash again
|
sorry I wrote a mistake, I meant: I changed a keyboard from Rev6 to a Rev3.
|
Quote:
Oi landex. Como estás? Bem? Então vamos atacar vosso problema! Back to English: The keyboard version don't matter. Did you put that metal braid in contact with the floppy unit? If not, you are running into problems for free.:banghead If you have some electronic skills, grab the opportunity to swap the capacitors in the keyboard PCB. They commonly dry over the years. |
All times are GMT +2. The time now is 17:16. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.