Cannot open "workbench.library"
 

A 4000D with 030 and picasso IV
After i install os 3.9 and bb1 bb2 i had problem to boot into OS than i
change startup sequence
adding SET PATCH SKIPROMMODULES"scsi.device" QUIOT fix problem i get workin os.39 with BB2 but dont know what actualy i turn off...
After installing ClasicWB cannot open "workbench.library" version 45
Unable to run amidock.....
In startup equence missing romupdates part...
any solutions or i must reinstall all from start without disabling scsi device ...

Copy workbench.library from OS 3.9 to Libs ?

I make bakup old workbench.library and copy from os 3.9 same error.

using scout os3 iget info at my workbench.library is 40.5? Hmm it is like i dont have BB 2 installed? Or is disabled?

Make sure that your C:SetPatch is version 44 or newer.

my is 43.6?

Get this version from my Dropbox and try again
http://dl.dropbox.com/u/939939/SetPatch

Most frustrating OS install ever for me.... maybe have to leave all some time..
Its just not working i tryed couple times delete all and start again some problems allready start becaouse i didn't use emrgency disk when install 3.9 before Classic WB installation.
Using Thomas files to mount AmigaOS3.9 iso when i reboot get error FAT95 is not there (fixed ) and errors for compactflash device ( i use REAl hard disk) and CFO:
What should i change in Copy_Files to emrgency disk boot and start install from Amiga OS 3.9 iso file...have legal disk but not CD not even in amiga or PC(broken dvd)
Its about to much realy

and what is good order

OS 3.9 BB1-bb4 than ClassicWB or os3.9 than BB1-BB2 ClassicWb than BB3-BB4

Mounting with Thomas file inside workbench is good for CF card NOt for hard disk..
best solution is to mount Amiga iso file with daemon tool inside windows than in WinUae add like image file ...working.. not neede Fat95 and other CDO.

Can you upload the Setpatch v44 again Please? I'm getting the Cannot open workbench.library error now.

Sure. Will give new link later on.


Sent from my iPhone using Tapatalk