English Amiga Board

English Amiga Board (http://eab.abime.net/index.php)
-   Coders. General (http://eab.abime.net/forumdisplay.php?f=37)
-   -   Enforcer (http://eab.abime.net/showthread.php?t=74388)

mritter0 14 July 2014 19:56

Enforcer
 
I am setting Enforcer back up for the first time in 15+ years. Looking for some recommendations for best practice.

In Startup-Sequence after SetPatch I have
Code:

Enforcer/SegTracker
Run >NIL: Enforcer/Enforcer

I am using WinUAE so I don't see the LED flashes. How do I get a hit report? What args do you use/recommend?

I am also interested in Sashimi. I am assuming run after Enforcer. Again, how to get output when started in Startup-Sequence?

Thanks

Toni Wilen 14 July 2014 20:05

You don't get any hits without enabling MMU emulation. Which is quite slow, you probably don't want to keep it enabled normally. (Note also that 68040/060 MMU emulation is faster than 68030)

mritter0 14 July 2014 20:08

How about this:
Code:

Run >NIL: MungWall/MungWall NAMETAG
Run >NIL: Enforcer/Enforcer RAWIO
Run >NIL: Sashimi/Sashimi CONSOLE BUFK=64 NOPROMPT ASKEXIT ASKSAVE

LawBreaker causes an output window now.

@Toni: Using WinUAE with 68040 (JIT) with CPU-Internal FPU. I am running it on an 8-core AMD so speed isn't really an issue.

Toni Wilen 15 July 2014 08:58

Quote:

Originally Posted by mritter0 (Post 964297)
@Toni: Using WinUAE with 68040 (JIT) with CPU-Internal FPU. I am running it on an 8-core AMD so speed isn't really an issue.

You don't have JIT. JIT and MMU emulation are not compatible.

daxb 15 July 2014 12:45

On A1200 040 I use sashimi like this (the console config is KingCON specific):
Code:

Run <>NIL: C:Sashimi CONSOLE WINDOW="CON:0/16/640/100/Sashimi  [Ctrl]+E=Empty  [Ctrl]+F=File  [Ctrl]+D=Reset console/ALT0/16/640/500/AUTO/CLOSE/WAIT/INACTIVE/NOFNC/NOMENUS/NOGADS/" BUFK=1024 NOPROMPT ASKEXIT ASKSAVE SAVEAS Work:_Hits.txt EMPTY

Toni Wilen 15 July 2014 12:49

Forgot to mention, under emulation you don't necessarily need any serial capture programs, all serial data appear in log console window if -serlog parameter is used. (-log parameter opens log console window)

thomas 15 July 2014 16:09

Quote:

Originally Posted by mritter0 (Post 964290)
I don't see the LED flashes.

Enable on-screen display on the Misc page.

There is winuaeenforcer in the Amiga programs directory. It works with JIT.


All times are GMT +2. The time now is 18:30.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2022, vBulletin Solutions Inc.

Page generated in 0.07206 seconds with 11 queries