OS 4.1FE and Classic 4.1.6 Voodoo 3 Warp3D test
 

I hope this topic is allowed because many applications work with voodoo3 and maybe it is worth continuing with the tests.
I would like to insert the applications and games that work to improve any support for the 4.1 version of amiga also with any external or internal corrections to winuae.

I also remember that many of these tests can be done with 4.1.6 Classic

-wipeout 2097 works perfect in window
https://www.youtube.com/watch?v=6cwXFMb3A7I

It seems a bit slow? The original runs at 60 fps. 30 fps, but seems much faster.

It plays just like on original Amiga hardware so in that sense it is mission accomplished. Well.... once integration with aos3 is fully operational anyway.

https://www.youtube.com/watch?v=QElf2Ws1WXQ

So from what you guys are showing here - am I right in understanding that WipeOut 2097 could only run in a Window under native OS4.1 & not full-screen?

@Mad-Matt
Thanks for your video
i hope other users test warp3d with 4.1 the aim is to have more people doing the tests

@dreadnought
30fps is fine too :-)

@andyhants 640x480 has a refresh issue but fullscreen 800x600 1024x768 is fine but the game gets a little slower the higher you go. It was easier to record in a window without having to mess with upscaling for youtube.

-PayBack works but has slowdowns apparently it seems in reading data or something like that I still haven't understood
https://www.youtube.com/watch?v=rG7CFCUlxRc

there is an underlying problem from how I was suggested the "GURUMEDITATION" or the DSI which is the underlying problem of why Warp3D does not work well with 4.1 when starting the "applications-games" if it were solved it would work much better and as if some instructions failed

Payback runs way too fast in AOS4 for me. along withthe refresh issues the game textures flicker alot.

@Mad-Matt
If I remember correctly I replaced the prefs with the one present in the payback demo in the installation of the original cd and it seems to work but I did it a long time ago 'I don't remember

@white
but how you run voodoo3 on OS4? i tried, but it remain undetected. Do you change from Picasso IV or do you have changed one and added the other?
However i tried every config, but Voodoo3 is unknown for OS4

@Seiya
when installing the 4.1 system simply choose voodoo

winuae PCI
and mediator 4000mk2 Full PCI DMA
also for network and audio

https://youtu.be/vM3q_SPlkZA

Quick vid of payback. Wouldn't want to play it with it running like this. Runs better in AmigaOS3 with 68k Jit.

I have to reinstall it then and try again I used it just to test by reading the other posts with the tests for the cvision64

I tried just out of curiosity "spencer demo" written for "warp3d and nova" and it works but in some cases the audio stops.
Have you tried it? "OS4.1FE"

Looks like it simply runs as fast as possible. Could be normal behavior and some vsync/frame limiter option needs to be enabled.

I just wanted to report this using 4.1FE with "wazp3D" all these applications work the same obviously with a lower video rendering.
But the "DSI" problem always recurs the requester appears I ignore the error and then the application starts and works so I think there is something underlying that has nothing to do with Warp3D at least in part if it were solved it would be a great step for 4.1

@Toni
thank you for your suggestion

also works "Spencer" I forgot to allocate more memory
this is written for warp3D and Nova so I believe it is newer than QuakeGL executables etc.
https://www.youtube.com/watch?v=B6yf2fr7lXs

Also works Alien vs Predator (PC version)
without defects and out of parameters but this shows the emulation of the voodoo with winuae and of first quality.
There would probably be work to be done but the potential is there
https://www.youtube.com/watch?v=N0OdR2h093s

I read that there is now G-Rex + voodoo3 support in the beta of the day
I tried a clean install of 4.1 on reboot the screen stays black.
If, on the other hand, I modify an existing 4.1 installation with the "GRex" line in the startup-sequence and enable the G-Rex+Voodoo3, the boot takes place without problems and everything is recognized and works.

-DemoPPC + Voodooo Work perfect (Rewarp)
I went back to looking better Rewarp I applied the patch correctly.
Now all DemoPPC + Voodoo works perfectly
textures are applied correctly and everything works.
Even the "DSI" or "GURUMEDITATION" no longer occurs.
Gears "Warp3D" still has transparencies so Rewarp can't solve the problem of transparency in the center.
Games like quakeGL etc. they still don't work with Rewarp
"Thellier" is it possible to work on this?
Could it help Winuae in some way to apply corrections?
Can it be useful if modified in some way?
Thanks
https://www.youtube.com/watch?v=XP0hR7lWH0Q