English Amiga Board
Page 3 of 36 12 3 4513 Last »
Show 20 post(s) from this thread on one page

English Amiga Board (https://eab.abime.net/index.php)
-   support.Other (https://eab.abime.net/forumdisplay.php?f=74)
-   -   P96 3.0.0 (and later) news and support (https://eab.abime.net/showthread.php?t=105576)

thomas 27 October 2020 09:05
Quote:
Originally Posted by Minuous (Post 1437381)
OK, but if it is just a "generic loader, which is identical for all P96 drivers" how are Brian King and/or Cloanto able to claim copyright on it?
The generic loader is Devs/Monitors/uaegfx.

But ThoR is talking about Libs/Picasso96/uaegfx.card.

@ThoR: AFAIK WinUAE has uaegfx.card built in now. There shouln't be any copyright issues any more. Just copy the p96 file to Devs/Monitors with the right tool type and that's it. No need to distribute uaegfx.card.

AMIGASYSTEM 27 October 2020 09:50
In addition uaegfx.card "integrated into WinUAE" is also more up-to-date than existing file versions.

DarrenHD 27 October 2020 15:32
Quote:
Originally Posted by Thomas Richter (Post 1437369)
I do not know what your workbench screen mode is, and what your picture datatype is, and what the picture is. If the picture is a JPEG, and the datatype is that from 3.1.4, then Multiview will open a true color screen. If your workbench is not a true color screen, then these modes cannot be mixed.
Hi Thomas, my workbench is 1024x768x16. The picture I opened with multiview on a separate screen was the OS3.9 backdrop image of the same size. But anyway, I want to try again on a clean install - there are some software issues that I have we could talk about in private message if you want, but otherwise I will see if it works on a new install of AmigaOS.

Thanks
Darren

Toni Wilen 27 October 2020 17:29
Quote:
Originally Posted by thomas (Post 1437384)
The generic loader is Devs/Monitors/uaegfx.

But ThoR is talking about Libs/Picasso96/uaegfx.card.

@ThoR: AFAIK WinUAE has uaegfx.card built in now. There shouln't be any copyright issues any more. Just copy the p96 file to Devs/Monitors with the right tool type and that's it. No need to distribute uaegfx.card.
Yes. Only "generic loader" needed. uaegfx.card is not used even if it exist since WinUAE 1.5.0.

Rotzloeffel 27 October 2020 18:32
Quote:
Originally Posted by DarrenHD (Post 1437329)
So I tried opening a jpeg on a separate screen and screen dragging still did not work. Not sure what I am doing wrong. I am using a CV3D gfx card.
Du you use os3.2? This is Not Working actually !

pcotter 28 October 2020 20:03
Hello
Can someone confirm if tools like ModePro is working?
Doesn't work for me. Have only tried on the Amithlon.
Thanks

DarrenHD 29 October 2020 02:22
Quote:
Originally Posted by Rotzloeffel (Post 1437489)
Du you use os3.2? This is Not Working actually !
I see, that's why I wanted to take it to private message.

eXeler0 29 October 2020 10:11
are iComp the only ones selling P96 or can it be bought from some other retailer who uses PayPal?

E-Penguin 29 October 2020 11:33
only from iComp via their web store. Luckily the quality of the hardware is better than that of their online commerce software

Rotzloeffel 29 October 2020 12:02
Quote:
Originally Posted by pcotter (Post 1437691)
Hello
Can someone confirm if tools like ModePro is working?
Doesn't work for me. Have only tried on the Amithlon.
Thanks
I use newmode without any problems

eXeler0 29 October 2020 16:03
Quote:
Originally Posted by E-Penguin (Post 1437780)
only from iComp via their web store. Luckily the quality of the hardware is better than that of their online commerce software
Indeed, the fact that you have to be logged in to even see the product in their store...serves what purpose exactly?

nogginthenog 29 October 2020 19:31
Does anyone know if there is a list of cards that support screen dragging?

Thomas Richter 29 October 2020 19:55
Quote:
Originally Posted by nogginthenog (Post 1437854)
Does anyone know if there is a list of cards that support screen dragging?
Pretty much everything that is in the archive except the CVisionPPC because the Permedia2 chip does not support it. So this makes the following:

- CyberVision
- PicassoII
- Omnibus
- Pixel64
- cvision3d
- Picasso IV
- Piccolo
- Domino
- GVP Spectrum
- Altais/Retina
- RetinaBLT
- PiccoloSD64
- Merlin
- Graffity


The GBAPII++ card, even though the driver is not part of the P96 distribution, also supports screen dragging due to the chip driver it is build on. Thus, it is really the chip driver (and not the card) that has to support screen dragging.


The UAE built-in graphics card emulation also supports screen dragging.

nogginthenog 29 October 2020 20:09
Thanks Thomas!

I have a Z3 Cybervision 64/3D. Dragging is not working for me. I'll do some testing this weekend.

Thomas Richter 29 October 2020 20:11
Quote:
Originally Posted by nogginthenog (Post 1437861)
Thanks Thomas!

I have a Z3 Cybervision 64/3D. Dragging is not working for me. I'll do some testing this weekend.

Did you read the FAQ? Which Os version? Yes, this is tested.

E-Penguin 30 October 2020 12:45
Quote:
Originally Posted by Thomas Richter (Post 1437859)
The GBAPII++ card, even though the driver is not part of the P96 distribution, also supports screen dragging due to the chip driver it is build on. Thus, it is really the chip driver (and not the card) that has to support screen dragging.
Excellent; I was about to ask just this on A1k :)

klx300r 30 October 2020 13:49
Any VA2000 users here know how to get a hold of Lucas (MNT) to see if he can add screen dragging support for this new P96 version?

Thomas Richter 30 October 2020 16:43
It's quite obvious: Go to his shop, the email is right there at the bottom of the page.

hUMUNGUs 30 October 2020 18:51
Quote:
Originally Posted by klx300r (Post 1437961)
Any VA2000 users here know how to get a hold of Lucas (MNT) to see if he can add screen dragging support for this new P96 version?
irc: freenode.net, #mnt-amiga mntmm

nogginthenog 30 October 2020 19:39
Quote:
Originally Posted by Thomas Richter (Post 1437862)
Did you read the FAQ? Which Os version? Yes, this is tested.
Thanks Thomas, I read the FAQ. OS 3.14

Anyone here with a Cybervision/3D with working dragging?


All times are GMT +2. The time now is 09:31.
Page 3 of 36 12 3 4513 Last »
Show 20 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Page generated in 0.07015 seconds with 11 queries