Quote:
Yes, the cover closes well. mine is a CDTV with ACE2, Sukkopera 1.3/3.1 CDTV rom switcher, exp rom 2.3 and Witcher CDTV I use it almost exclusively with the hard drive, so someone else could answer that. I tested only a single CD (CDTV Welcome disk) that seemed to work. Mine is suffering from the usual dodgy PSU issue, so most of the time to kick-in the SD I have to power on and then push the reset button (was behaving like that with another expansion as well) |
Quote:
I do have the same expansions installed, except for the ACE2. However, I noticed that both with WHDLoad and booting directly from disk, there is a dramatic drop in frame rates every now and then. It goes down to single digits. Is that related to the Wicher-Card? |
New hardware:
Wicher 1211 - Fast Memory expansion for Amigi 1200 https://www.7-bit.pl/images/Wicher1211_450.jpg Video Specification
SPI BusBoard - for Wicher 500i, Wicher 500iEx https://www.7-bit.pl/images/SPIBusBoard_450.jpg Video Specification
|
Free CPLD firmware update for Wicher 500i rev.2a and rev.2b cards.
https://www.7-bit.pl/?lang=en&go=aktualnosci&view=202 |
Great news for Wicher owners!
|
New turbo cards in preparation :)
https://www.7-bit.pl/foto/100_2355_400.JPG Wicher 520EC - MC68EC020 processor clocked at 25 or 33 MHz, - RAM memory: 11MB FAST RAM for AmigaOS, - RTC clock, - SPI controller, - MapRom function, - BootRom function (included HD disk driver for Kickstart 1.3), - FileRom function (loading Kickstart from a file). - cooperation with the SPIBusBoard (microSD reader and Ethernet controller). https://www.7-bit.pl/foto/100_2360_400.JPG Wicher 520i - MC68020 processor clocked at 25 or 33 MHz, - RAM memory: 16MB FAST RAM for AmigaOS, - RTC clock, - SPI controller, - MapRom function, - BootRom function (included HD disk driver for Kickstart 1.3), - FileRom function (loading Kickstart from a file). - cooperation with the SPIBusBoard (microSD reader and Ethernet controller). |
Wicher520EC and Wicher520i allow to start Workbench 1.3 (Kickstart 1.3) from hard drive.
https://youtu.be/8SfbmDcmvZY |
Wow, nice work!
|
Hi Spidi
Have 1 question about the Spi Busboard. Will it work with SPI MasterBus CP on amiga 600 |
Awesome :) SDRAM > DDR. Had it in my $3000 Dell computer, and then the cheapos destroyed it for us techies as always...
|
Hi
Wicher 5201 will it work on 500+ |
Quote:
Requires an Amiga 1200 compatible clock port. |
Quote:
|
@Spidi - any chance of new firmware for Rhys MkII adaptors. Loads of modern wireless nice, particularly Logitechs no longer work.
I know you said a year or two ago you were going to look into it, but there's been nothing since |
Quote:
|
@spidi does your clockport spi module work on clockports other than the A1200? Can it be set to work on a clockport on a zorro card such as an ISDNSurfer?
|
Hi
Got my spi masterbus cp controller today, looking forward to buy the busboard. How are the pinout, just a picture with pin 40 mark |
Is LAN support dropped from SPI masterbus? There is no manual for it and new archive doesn't have a driver anymore?
|
Quote:
|
Quote:
|
All times are GMT +2. The time now is 15:41. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.