View Single Post
Old 09 May 2024, 21:37   #243
PiCiJi
Registered User
 
PiCiJi's Avatar
 
Join Date: Sep 2003
Location: germany
Age: 45
Posts: 418
nightly:

fix Hopp oder Top
fix Hotshot:
The game is very dependent on accurately emulating the position of the read/write head. If the head is unfavorably located when the sync word is recognized, it can happen that the sync word does not end up in the Fifo, which is not an error but crash the game. Altered drive speed can cause the situation to occur. The timing in Denise was not correct when the IPF had no timing information (variable bit cells), but a bit length that deviated from the standard.

Hotball:
game has no tracks with timing information, no additional revolutions (weak bits) but the bit length for all tracks is very different from the standard. Presumably, the IPF is not in order. Maybe someone has a comparison version.
edit: In addition, I examined reasons that point to mechanical conditions. These would be a reason why even a Gotek could fail. The floppy disk controller is not located in the drive or Gotek.
1. Motor will not shut down when data is read.
2. No tracks/side are changed while data is being read.

rearranged User interface for options that apply globally to all cores. Several controls have been transferred to the C64/Amiga menus and the remaining settings have been combined under "drivers". The volume slider is now in the status line. This can also be hidden again under options->on screen status

Last edited by PiCiJi; 09 May 2024 at 22:12.
PiCiJi is offline  
 
Page generated in 0.07350 seconds with 11 queries