English Amiga Board

English Amiga Board (https://eab.abime.net/index.php)
-   support.Amix (https://eab.abime.net/forumdisplay.php?f=125)
-   -   Problems with CPIO while installing AMIX on WinUAE 4.x (https://eab.abime.net/showthread.php?t=112002)

tekmage 27 September 2022 19:30

Problems with CPIO while installing AMIX on WinUAE 4.x
 
Hi All,

New request. Has anyone been able to install AMIX based on AmigaUnix wiki instructions with WinUAE 4.x?

I've been trying to install the 2.1 release based on the two floppies and the tape archive on the wiki using WinUAE. Every time I try, the system panics due to CPIO. I've tried all three options, and none is complete without the panic.

Is anyone out there willing to try it and see if you get the same results?

It's as simple as opening this link, downloading the files, and giving it a go.

Thanks!
Bill

tekmage 27 September 2022 19:34

Here is what the panic looks like:

TRAP
proc = 400BB000 (pid 67, cpio) psw = 2300
pc = 70010B2

PANIC: KERNEL FAULT psw=0x2300, pc=0x70010B2, fmt=0x0, vector=0xB (Line-F Emulator)

thomas 27 September 2022 21:14

At which stage exactly does it panic for you?

I followed the instructions and installation seems to work just fine.

Selected keyboard (de)
Selected harddrive (default)
Selected partitions (default,default,default)
Selected file system (default)
Selected "everything on the tape".

Still running...

tekmage 27 September 2022 21:52

Success!

I updated my WinUAE to 4.9.1 and ran it again with option 3, custom, and just used the default packages.

Installation was successful.

I was also able to build the out of the box kernel! Now to try this image on my ReAmiga 3K :)

tekmage 27 September 2022 21:52

@thomas,

It was failing at different points, often at the X windows packages.

Wrangler 27 September 2022 22:06

I reckon you turned on "more compatible" in the CPU options, which ironically breaks Amix on WinUAE.

Incidentally, I did a whole video on installing Amix via WinUAE here

https://youtu.be/mClW2kW0zVM

thomas 27 September 2022 22:15

1 Attachment(s)
Worked perfectly for me.

Attached is my config.

freakofnature 27 September 2022 23:18

Quote:

Originally Posted by tekmage (Post 1566997)
Here is what the panic looks like:

TRAP
proc = 400BB000 (pid 67, cpio) psw = 2300
pc = 70010B2

PANIC: KERNEL FAULT psw=0x2300, pc=0x70010B2, fmt=0x0, vector=0xB (Line-F Emulator)


Happens when MMU is off. (JIT on)

Amix is a strange experience. Feels like time travelling back into the mid-80s. Now i'm more than ever grateful for this being the past not the present :D

rhester72 25 April 2023 03:25

Sorry for necrothreading...but no, I too have gotten the same PANIC: KERNEL FAULT during install randomly at some point during install (this very attempt, it was at "Installing System administration utility", and MMU is on with JIT off. This is on the latest beta, but my understanding this has been a problem during installation (mitigated only by rare random luck) for several versions now.

mark_k 28 April 2024 21:31

I have been seeing this problem too. Trying to install Amix 2.03 from tape with A3000+A2065+A2410 config, it crashes at a seemingly random point every time.

Tried different versions of WinUAE from 3.6.0 to 5.3.0b5. Tried varying some settings like FPU softfloat, no change.

I wonder if there is technically a bug in Amix or the installer which only shows up when things are much faster than they ever were on real hardware?

The fault type and program name can vary each time, it's not always cpio. Some examples:
Code:

Installing Other GNU source code
cpio: Bad magic number/header.
1 errors
installation of gnusrc failed

Installation from tape failed.
dd: write error: I/O error

Patching kernel...

The system is halted; you may reboot or turn off power.

Code:

Installing Uucp networking software
TRAP
proc = 400D5400 (pid 118, sort) psw = 2000
pc = 703CD68
Fault addr = 401CA788

PANIC: KERNEL FAULT psw = 0x2000, pc=0x703CD68, fmt=0xA, vector=0x2 (Bus Error)

Code:

Installing Open Look development tools
TRAP
proc = 4015B200 (pid 154, awk) psw = 2010
pc = 1

PANIC: KERNEL FAULT psw=0x2010, pc=0x1, fmt=0x0, vector=0xB (Line-F Emulator)

Code:

Installing GNU Emacs editor
TRAP
proc = 400DD600 (pid 165, zcat) psw = 2008
pc = 80001

PANIC: KERNEL FAULT psw=0x2008, pc=0x80001, fmt=0x0, vector=0xB (Line-F Emulator)


Toni Wilen 29 April 2024 21:18

You do have 68030 + 68881 + MMU + fastest possible and nothing else enabled? (More compatible etc must NOT BE enabled)

pixie 29 April 2024 22:36

Quote:

Originally Posted by rhester72 (Post 1611820)
Sorry for necrothreading...but no, I too have gotten the same PANIC: KERNEL FAULT during install randomly at some point during install (this very attempt, it was at "Installing System administration utility", and MMU is on with JIT off. This is on the latest beta, but my understanding this has been a problem during installation (mitigated only by rare random luck) for several versions now.

I guess it as much actual question now then it was then, it's not like multiple versions of a mix were released since ;)

mark_k 02 May 2024 21:21

Quote:

Originally Posted by Toni Wilen (Post 1681994)
You do have 68030 + 68881 + MMU + fastest possible and nothing else enabled? (More compatible etc must NOT BE enabled)

Yes. If you want to try it yourself, config is at https://www.4!shared.com/s/fO8-be4aYfa

I used a 256MB HDF.

Floppy images amix_2.03_boot.gz and amix_2.03_root.gz, tape files in amix_2.03_tape.tar.bz2 from amigaunix.com downloads.

Toni Wilen 05 May 2024 19:18

2.1 Amix install seems to work. 2.03 seems to crash randomly. Not going to debug because it is far too random and can't be reproduced.


All times are GMT +2. The time now is 12:52.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Page generated in 0.04373 seconds with 10 queries