Connecting A1200 to PC

Djay · 22 May 2002, 21:50

Exactly what PCMCIA adaptor do i need for my A1200.. and is it okay to connect it via a hub, which also has broadband plugged into it? And what type of Ethernet cable do i need, i would of thought standard patch (because of the hub).

What software do i need, both for the Amiga and for the PC?

And... phew...

if you have tested a brand of Floppy disks that are 1.44mb (PC formatted), that work on the Amiga, could you tell me which?

I know i've got some software and music, i haven't found on the net.... waiting to be turned into ADFs.

Sorry if previous threads have answered some of these questions, but a sort and simple answer would be REALLY handy!!!

ElectroBlaster · 22 May 2002, 23:17

Hi!

Any pcmcia card thats ne2000 and 16bit will work.. well some wont like the 3com's because of the stupid case design on the things

Do a search using webferrit or your fave search engine and you will find a list of compatible ether cards for the amiga!

I have:

Kingston KNE-PC2T 10mb ethernet pcmcia card
cnet.device - from aminet to drive the card!
NetconnectV3 - for its TCP stack!
Samba - for file sharing!
cardreset - in my C drawer to envoke the missing reset on a1200's
*I should buy the proper reset board but the cardreset bodge works well for me

Also the internet sharing sounds like a good idea! I might try and give it a shot and see if it works! dont see why not...

if you have more than 1 pc you will need a hub and the straight cat5 cables! if its just an amiga and 1pc then you need a cat5 crossed cable to make a peer2peer network

How does your broadband modem connect to the pc? is it usb or ethernet?

About using HD floppy's on the amiga... I personally have used loads of em! cheapo's and expensive and none have ever played up.. but some people's amiga's hate them so I cant say for defo that they work 100% for everyone....

Akira · 26 May 2002, 03:18

I tried another one that wouldnt fit. I think the"Cardbus" type PCMCIA2 cards wont fit.

Gotta hate that stupid non-standard case design!

22 May 2002, 21:50	#1
Djay breakpointUK.com Join Date: May 2001 Location: Brighton, UK Age: 37 Posts: 3,076	Connecting A1200 to PC Exactly what PCMCIA adaptor do i need for my A1200.. and is it okay to connect it via a hub, which also has broadband plugged into it? And what type of Ethernet cable do i need, i would of thought standard patch (because of the hub). What software do i need, both for the Amiga and for the PC? And... phew... if you have tested a brand of Floppy disks that are 1.44mb (PC formatted), that work on the Amiga, could you tell me which? I know i've got some software and music, i haven't found on the net.... waiting to be turned into ADFs. Sorry if previous threads have answered some of these questions, but a sort and simple answer would be REALLY handy!!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Burning Rubber A1200 - does it need AGA?	andreas	support.Games	22	20 October 2010 01:49
Strange A1200 behaviour	manicx	support.Hardware	39	09 November 2005 08:32
A1200 , and a1200 hardware	keropi	MarketPlace	23	22 February 2005 00:17
Transfer UAE Hard Disk to A1200	Loogie	support.WinUAE	22	27 August 2004 13:53
My A1200 Less Compatible Than UAE!	Parsec	support.Hardware	8	17 June 2003 08:09

22 May 2002, 23:17	#2
ElectroBlaster Junior Member Join Date: Mar 2002 Location: Exeter, Devon, UK Age: 38 Posts: 1,180	Hi! Any pcmcia card thats ne2000 and 16bit will work.. well some wont like the 3com's because of the stupid case design on the things Do a search using webferrit or your fave search engine and you will find a list of compatible ether cards for the amiga! I have: Kingston KNE-PC2T 10mb ethernet pcmcia card cnet.device - from aminet to drive the card! NetconnectV3 - for its TCP stack! Samba - for file sharing! cardreset - in my C drawer to envoke the missing reset on a1200's *I should buy the proper reset board but the cardreset bodge works well for me Also the internet sharing sounds like a good idea! I might try and give it a shot and see if it works! dont see why not... if you have more than 1 pc you will need a hub and the straight cat5 cables! if its just an amiga and 1pc then you need a cat5 crossed cable to make a peer2peer network How does your broadband modem connect to the pc? is it usb or ethernet? About using HD floppy's on the amiga... I personally have used loads of em! cheapo's and expensive and none have ever played up.. but some people's amiga's hate them so I cant say for defo that they work 100% for everyone....

26 May 2002, 03:18	#3
Akira Registered User Join Date: May 2001 Location: # Posts: 12,592	I tried another one that wouldnt fit. I think the"Cardbus" type PCMCIA2 cards wont fit. Gotta hate that stupid non-standard case design!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

AdSense
Advertisement: