|03 May 2006, 19:01||#1|
Join Date: Feb 2005
SCSI Hard Drive Problems
Ok, so I have a Supra Wordsync 2000 and a 1gb scsi HD. This is the process I went through:
Turn auto-boot jumper off
Boot with supraboot disk.
Set drive parameters as follows: Cylinders 1182
Set DH0 boot partion, size 100
Set DH1 boot partion, size 900
Click create partion info
Click quick format partions
Reboot with bootdisk
Install WB 2.0
Set auto-boot jumper to on
Amiga gets to a white screen and hangs
I have tried to set this up 3 times with no luck
Now it wont even boot with bootdisks
The wordsync was working fine with a 75mb, but I didnt set that up
No full manual available on the internet
Any ideas? Has anyone used supra scsi before?
EDIT: Now the supraboot disks dont boot and just crash on an amigaDOS screen. I have recopiedf the disk images to new disks and the same thing happens, so now I cant reformat it!
Last edited by Smiley; 03 May 2006 at 20:41.
|04 May 2006, 00:05||#2|
Join Date: Sep 2005
Location: Nelson, New Zealand
I can't help you directly as I've not used the disk controller you've got - but it does appear that the driver disks are available here, so as long as you've got access to another Amiga, you could recreate the boot and setup disks...
|Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Wanted QUANTUM FIREBALL SCSI Hard Drive for Amiga 2000||Stormrider||MarketPlace||2||05 January 2006 05:32|
|Hard Drive problems||kaiowas||support.WinUAE||4||03 November 2005 20:13|
|4Gb SCSI drive problem||lloyd||support.Hardware||2||18 November 2004 13:42|
|30 gig hard drive problems on Amiga 1200 with 3.0 Roms||Codetapper||support.Hardware||33||24 October 2004 01:27|
|WinUAE and SCSI tape drive||xyzzy||support.WinUAE||0||25 March 2003 13:21|