English Amiga Board Amiga Lore


Go Back   English Amiga Board > Support > support.WinUAE

 
 
Thread Tools
Old 11 September 2016, 20:03   #221
Toni Wilen
WinUAE developer
 
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 42
Posts: 19,523
Quote:
Originally Posted by AnnaWu View Post
Thanks for the info, Toni.

The official version of PCem doesn't have any network support.
It does not really matter. Network = ISA card which is nothing more than few simple io ports + interrupt connected to existing NE2000 emulation (Already used as NE2000 PCI, NE2000 PCMCIA and now NE2000 ISA, only difference being IO mapping, also very popular RTL8019 is more or less NE2000 so something like Ariadne II or X-Surf would be easy to emulate too)

There is nothing sensitive or timing critical in network emulation (but sound on the other hand..).

Bridgeboards being old enough fortunately limit the choice of expansion hardware greatly
Toni Wilen is online now  
AdSense AdSense  
Old 11 September 2016, 20:15   #222
AnnaWu
Registered User
AnnaWu's Avatar
 
Join Date: Dec 2012
Location: Germany
Posts: 429
Limited or not.
I like the x86 bridgeboard emulation.
AnnaWu is offline  
Old 11 September 2016, 20:48   #223
AnnaWu
Registered User
AnnaWu's Avatar
 
Join Date: Dec 2012
Location: Germany
Posts: 429
b6

Toni, please can you explain me why I get a crash if I try to load Cannon Fodder with CD32 FMV + SX32-Pro accelerator support?
No problems with WinUAE 3.3.0 series.
Attached Files
File Type: uae Amiga CD32 Cannon Fodder +.uae (12.9 KB, 21 views)
File Type: txt winuaebootlog.txt (14.6 KB, 15 views)
File Type: txt winuaelog.txt (7.5 KB, 26 views)
AnnaWu is offline  
Old 11 September 2016, 20:56   #224
AnnaWu
Registered User
AnnaWu's Avatar
 
Join Date: Dec 2012
Location: Germany
Posts: 429
Cannon Fodder with CD32 FMV

Also the intro with the tank is missing.
AnnaWu is offline  
Old 11 September 2016, 21:07   #225
AnnaWu
Registered User
AnnaWu's Avatar
 
Join Date: Dec 2012
Location: Germany
Posts: 429
Quote:
Originally Posted by AnnaWu View Post
Cannon Fodder with CD32 FMV

Also the intro with the tank is missing.
The problem with the intro is solved.
Instead of :Enabled I choosed the available ROM (CD32 FMV)
The config is not 1:1 applicable.
AnnaWu is offline  
Old 11 September 2016, 22:17   #226
mark_k
Registered User
 
Join Date: Aug 2004
Location:
Posts: 2,479
A minor GUI issue with the Expansion Board Settings. This happens with the 3.4.0 betas but not 3.3.0.

Any "extra settings" controls for a given expansion remain shown when you change the expansion category. For example:
- Run WinUAE, click Expansions.
- In Expansion Board Settings, select SCSI Controllers then below that A4091 (Commodore). A drop-down box appears below with options Fast Bus, Delayed autoboot etc.
- Change SCSI Controllers to something else, e.g. RTG boards. The A4091 drop-down box remains shown.
mark_k is offline  
Old 11 September 2016, 23:00   #227
AMIGASYSTEM
Registered User
AMIGASYSTEM's Avatar
 
Join Date: Aug 2014
Location: Brindisi (Italia)
Posts: 1,942
Quote:
Originally Posted by AMIGASYSTEM View Post
Ciao Toni, sorry again, I would like to report the minor faults of 3.4.0 b5 but also present in previous beta 3.4.0, I do not know if the problems are just my (Win7 32Bit), i hope my English is inclusive.

- If you create a new config from scratch for OS4.1 sound cards FM801/ES1370 also activated with relative check They are no longer present on OS4.1.
The new saved config, when viewed with 3.3.0 shows FM801/ES1370 are disabled

- With 3.4.0 b5 but also in 3.4.0 previous Beta with sound cards FM801/ES1370 on OS4.1 the sound is very distorted, with 3.3.0 (same config same system) the sound feels good.

- With 3.4.0 b5 but also in 3.4.0 previous Beta with with the graphics card UAE Zorro III the opening of the Workbench windows turns out to be slower than Picasso IV (Workbench graphical windows disgusting), with 3.3.0 (same config same system) no problem.
Although I did not have answers, thanks for the fix

- B6 Fixed issue save audio cards on creating new config
- B6 improves sound quality though still not perfect yet on my PC
- B6 improves speed and slowing graphic window opening with UAE Zorro IIII, Picasso IV board is always faster and no graphical slowdown.
AMIGASYSTEM is offline  
Old 12 September 2016, 00:34   #228
Arnie
R.I.P Smudge 18-08-16

Arnie's Avatar
 
Join Date: Aug 2005
Location: Leicester/UK
Age: 59
Posts: 3,861
Xebec config now working in B6.
I had to make a new config though as the old one wouldn't work.
Arnie is offline  
Old 12 September 2016, 00:41   #229
APC74
Registered User

APC74's Avatar
 
Join Date: Aug 2014
Location: Country
Posts: 2
Quote:
Originally Posted by Toni Wilen View Post
Does speed now match 3.3.0?
Well, yes.

APC74 is offline  
Old 12 September 2016, 09:02   #230
AnnaWu
Registered User
AnnaWu's Avatar
 
Join Date: Dec 2012
Location: Germany
Posts: 429
b6

I have another problem with CD32 emulation + CD+G (Karaoke) support.
Can not load/play the Music + Graphics
No problems with the WinUAE 3.3.0 series.
Attached Files
File Type: uae Amiga CD32 Peter Gabriel.uae (19.4 KB, 16 views)
File Type: txt winuaebootlog.txt (14.7 KB, 16 views)
File Type: txt winuaelog.txt (11.3 KB, 15 views)

Last edited by AnnaWu; 12 September 2016 at 09:26.
AnnaWu is offline  
Old 12 September 2016, 09:07   #231
AnnaWu
Registered User
AnnaWu's Avatar
 
Join Date: Dec 2012
Location: Germany
Posts: 429
WinUAE 3.3.0
Same config (Amiga CD32 Peter Gabriel.uae)

AnnaWu is offline  
Old 12 September 2016, 09:25   #232
AnnaWu
Registered User
AnnaWu's Avatar
 
Join Date: Dec 2012
Location: Germany
Posts: 429
b6

CD32 emulation + VideoCD support
Can not load the CD image and play ...
No problems with the WinUAE 3.3.0 series.
Attached Files
File Type: uae Amiga CD32 VideoCD + Karaoke.uae (19.3 KB, 20 views)
File Type: txt winuaebootlog.txt (14.7 KB, 17 views)
File Type: txt winuaelog.txt (8.4 KB, 18 views)
AnnaWu is offline  
Old 12 September 2016, 09:31   #233
AnnaWu
Registered User
AnnaWu's Avatar
 
Join Date: Dec 2012
Location: Germany
Posts: 429
WinUAE 3.3.0
Same config (Amiga CD32 VideoCD + Karaoke.uae)

AnnaWu is offline  
Old 12 September 2016, 16:13   #234
Toni Wilen
WinUAE developer
 
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 42
Posts: 19,523
CD32 FMV rom load from pre-3.4.0 config fixed, CD32 CD audio first track problem fixed, Expansion GUI not hiding extra options fixed.
Toni Wilen is online now  
Old 12 September 2016, 18:15   #235
AnnaWu
Registered User
AnnaWu's Avatar
 
Join Date: Dec 2012
Location: Germany
Posts: 429
Quote:
Originally Posted by Toni Wilen View Post
CD32 FMV rom load from pre-3.4.0 config fixed, CD32 CD audio first track problem fixed, Expansion GUI not hiding extra options fixed.

Newest winuae.7z

CD32 emulation + CD+G (Karaoke) + VideoCD support is working now, thank you Toni.

Cannon Fodder with CD32 FMV + SX32-Pro accelerator support still produce a crash.
AnnaWu is offline  
Old 12 September 2016, 18:35   #236
Toni Wilen
WinUAE developer
 
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 42
Posts: 19,523
Quote:
Originally Posted by AnnaWu View Post
Cannon Fodder with CD32 FMV + SX32-Pro accelerator support still produce a crash.
There is no guarantee if it is correct or not. "Worked previously" means nothing in these kinds of impossible configurations.
Toni Wilen is online now  
Old 12 September 2016, 18:50   #237
AnnaWu
Registered User
AnnaWu's Avatar
 
Join Date: Dec 2012
Location: Germany
Posts: 429
Quote:
Originally Posted by Toni Wilen View Post
There is no guarantee if it is correct or not. "Worked previously" means nothing in these kinds of impossible configurations.
The original CD32 hardware support the SX32-Pro accelerator?
AnnaWu is offline  
Old 12 September 2016, 18:51   #238
AnnaWu
Registered User
AnnaWu's Avatar
 
Join Date: Dec 2012
Location: Germany
Posts: 429
CD32 FMV rom load from pre-3.4.0 config fixed

Thank you

Newest winuae.7z


b6
AnnaWu is offline  
Old 12 September 2016, 18:57   #239
Toni Wilen
WinUAE developer
 
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 42
Posts: 19,523
Quote:
Originally Posted by AnnaWu View Post
The original CD32 hardware support the SX32-Pro accelerator?
You said FMV and SX32Pro. How are you going to connect both at the same time?
Toni Wilen is online now  
Old 12 September 2016, 19:02   #240
AnnaWu
Registered User
AnnaWu's Avatar
 
Join Date: Dec 2012
Location: Germany
Posts: 429
Quote:
Originally Posted by Toni Wilen View Post
You said FMV and SX32Pro. How are you going to connect both at the same time?
Understand.
You mean, either FMV or SX32Pro.
Both can not operate simultaneously.
AnnaWu is offline  
AdSense AdSense  
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
WinUAE 3.0.0 beta series (was 2.8.2/2.9.0) Toni Wilen support.WinUAE 1012 15 December 2014 13:41
WinUAE 2.7.0 beta series Toni Wilen support.WinUAE 326 03 December 2013 23:37
WinUAE 2.5.0 Beta series (Was 2.4.2) Toni Wilen support.WinUAE 310 01 December 2012 18:02
WinUAE 2.3.3 beta series Toni Wilen support.WinUAE 124 17 September 2011 15:48
WinUAE 1.5.3 beta series Toni Wilen support.WinUAE 58 09 November 2008 13:46

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 10:25.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Page generated in 0.26216 seconds with 12 queries