English Amiga Board

Go Back   English Amiga Board > Main > Retrogaming General Discussion

Thread Tools
Old 29 December 2002, 20:49   #1
Cable Buyer
APFelon's Avatar
Join Date: Jul 2001
Location: Big Lake, USA
Age: 46
Posts: 123
Building your own MAME cabinet, Part One- The cabinet.

Earlier, someone had asked me to write a tutorial on how to build a MAME cabinet. Since I am too damned lazy to construct a website, and there has been a little interest on this forum, I will "grace" this forum with a step-by-step (hopefully omitting nothing) tutorial on how to go about building a MAME (and other emulators) cabinet for your recreation room, den, or kitchen. While this project may seem daunting, and since there are a lot of "junk" sites outlining the building of a cabinet, I thought I'd share my experiences and recommendations with you so in the event that you ever decide to build your own cabinet, you will have some advice and opinions that you may (or may not) find valuable.

Let's say you are thinking of undergoing the project of building your own cabinet. Where do you start? Well, the first thing to do is aquire the cabinet itself. Depending on where you are and your diplomatic prowse, this can either be a easy or a hard part of the project.

**Getting your hands on a cabinet**

There are a few ways of getting a hold of a cabinet. The easiest way is to buy one, but other people have actually BUILT cabinets. Unless you are a master of carpentry, I don't suggest this route. However, if you have the skills, there is no reason that you can't build one yourself. Just keep in mind that building on from scratch will require the purchase of all the stuff you can't build from lumber, like the monitor and the wiring. There are templates available to you on the Internet if you look hard enough, but the "effort to results" ratio may be a bit lower than if you just buy an actual arcade game.

So, where do you look for a cabinet, and what should you buy? The first place to look is for local dealers by your home. Just be aware that some video game operators don't want to deal with home users, since they tend to be wishy-washy and require an amount of time to bargain with, and might ask for technical help after they bring their game home. Your best bet is to go in to a operators location in person and flash some cash. But before you go in, know what you want to buy. If you want a cocktail machine, be sure to tell them right off the bat. If you opt for an upright, tell them the cabinet specs that you are looking for. I suggest a cabinet with a 25' monitor and a large control panel area (like a Teenage Mutant Ninja (Hero) Turtles, Mortal Kombat, or NBA Jam. Get a bigger cabinet if you can afford it, since the panel will generally be larger and you can install as many controls as you like.

Another good place to get a cabinet is an auction. Sometimes you can get a cabinet REALLY cheap, however, other times people will bid stuff up to absurd levels. Handle these things like you would on EBay, and use your descretion. What is a cabinet worth to you?

Last place to look is the local newspaper and Internet sites. The newspaper will, on rare occasion, run a want ad selling arcade stuff. The Internet is a bit trickier, since more often that not you will be dealing with people who live very far away from you. If you are on a budget, look for a seller close to you. If money is no object, this route will probably be your best bet... But shipping can be a killer, so be careful!

Be prepared to spend anywhere from nothing (it can happen) to 1000$ USD for a great cabinet.

**What to look for**

If you are like me, you hate buying stuff "blind" over EBay and such. Personally, I like to actually touch whatever I am going to drop a bundle of cash on. If I am going to spend over 100$ USD on ANYTHING, I want it to be at least salvagable if not serviceable. Check for water damage first. If there is rotting around the base of the cabinet, this usually means whatever electronics are inside has been exposed to humidity and may fail somewhere down the line. Monitor repair can be costly, so it is important to make sure it works if you plan to use it for your cabinet. Secondly, look for rodent infestation. While a family of mice may or may not have urinated all over the electronics, it is best to get a clean cabinet so any troubles with such things can be averted. Last, check for "hacks" in the wiring. Back when I used to be a service tech for arcade equipment, it was more important to have the equipment working than to keep it aesthetically correct. If you see a lot of electrical tape and bizarre soldering jobs, you might want to avoid the cabinet. The hacks can cause trouble when you try to install the computer and such. Last, get a JAMMA cabinet! This will make for ease of installation and will make your life easier. If a non-JAMMA cabinet falls within your price range, go ahead and grab it, but be aware that you will have to work harder to get your MAME machine up and running.

-note- A JAMMA machine is a machine that has been wired for the industry-standard "JAMMA" connectors, which is the defacto way modernish arcade equipment has been constructed. If you get a machine from the 90's, most likely it will have been wired for JAMMA.

The way APFelon got his cabinet- I was lucky enough to have a friend sell me his cabinet after he got married. It was a 25' Wrestlefest cabinet, perfect for a MAME project. I decided to keep the monitor in it and wired it for use with my computer.

My next installment will detail the hardware aspect of the MAME cabinet, and describe how to get your computer to work with MAME. Following installments will deal with software and cosmetics.

Any questions, feel free to ask!
APFelon is offline  
AdSense AdSense  
Old 30 December 2002, 00:04   #2
Junior Member
LaundroMat's Avatar
Join Date: Apr 2001
Location: In the cellar. With your mum.
Age: 43
Posts: 404
Thumbs up No questions but...

for starting these articles. Looking forward to the rest already.


An almost cash-less boy with a large living room just screaming for a cabinet.
LaundroMat is offline  
Old 30 December 2002, 00:45   #3
Registered User

Akira's Avatar
Join Date: May 2001
Location: New York
Posts: 19,229
keep it up APF, this is a great tutorial! I plan on building a pc+jamma cab this year, once I mve to my new studio

The studio MUST have a cabby
Akira is offline  
Old 30 December 2002, 01:39   #4
Registered User
Konrad's Avatar
Join Date: Apr 2002
Location: Germany
Age: 37
Posts: 563
Me too. I'm looking forward for the next parts.
Konrad is offline  
Old 30 December 2002, 12:55   #5
Registered User
Drake1009's Avatar
Join Date: Jul 2001
Location: Denmark
Posts: 2,284
I'd really like to get my hands on a cabinet, but I don't think our appartment has the space to accomodate this.
Drake1009 is offline  
Old 31 December 2002, 04:11   #6
Registered User
Shadowfire's Avatar
Join Date: Aug 2001
Location: Connecticut USA
Posts: 540
1st note - 25' monitors are just way too big. Unless you have want to have a drive-in movie in your living room. 25" monitors, however, are definitely the way to go. Most cabs with 25" monitors can still be moved through a standard 32" wide doorframe. If the cabinet has a control panel wider than 30", it can probably be detached from the cabinet and moved separately.

2nd note - DON'T look at the monitor and say "I can just have the local TV repair shop fix that" - odds are EXTREMELY good that the local shop will NOT have the equipment to generate test patterns on an arcade monitor, and will not be able to adjust the monitor. Either get one that already looks good, or get a friend who knows how to repair arcade monitors, or be prepared to buy a new monitor to replace the old one.

3rd note - unless you're a handyman, you definitely want to get the cabinet with better exterior condition, over a cabinet with a disgusting exterior condition. Most cabinets are laminated or have been painted over with black latex paint, or BOTH, and neither is a particular joy to fix. Capcom/Dynamo cabinets (IMO) look the best as long as you can find one in decent shape. I know some of you are saying "I don't give a damn I just want one NOW!!" but remember that it is going to be a permanent fixture in your house/apartment. You wouldn't want to have a rusted-out refrigerator in the kitchen, so don't pay any serious $$$ to get a crappy-looking cabinet.
Shadowfire is offline  
Old 31 December 2002, 07:45   #7
Cable Buyer
APFelon's Avatar
Join Date: Jul 2001
Location: Big Lake, USA
Age: 46
Posts: 123
Originally posted by Shadowfire
1st note - 25' monitors are just way too big. Unless you have want to have a drive-in movie in your living room. 25" monitors, however, are definitely the way to go.
Miss a shift key, get made fun of by a wise guy. WISE GUY! Don't make me regret telling you about this forum on RetroLamers (Retrogames)

As for monitors and such, I was getting to that part...
APFelon is offline  
Old 09 May 2004, 00:01   #8
Posts: n/a
What happened to the rest of this?
AdSense AdSense  

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Arcadia Cabinet games ? tomcat666 Games images which need to be WHDified 26 11 December 2014 01:09
anyone know stuff about MAME arcade cabinet builds techn1um Retrogaming General Discussion 59 10 September 2010 20:29
Buying an arcade cabinet LaundroMat Retrogaming General Discussion 6 26 April 2004 09:11
Yet another MAME cabinet thread. APFelon Retrogaming General Discussion 5 10 February 2003 20:53
Building your own MAME cabinet, Part Two - The Hardware APFelon Retrogaming General Discussion 1 01 January 2003 00:01

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT +2. The time now is 08:56.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Page generated in 0.07798 seconds with 12 queries