English Amiga Board Amiga Lore


Go Back   English Amiga Board > News

 
 
Thread Tools
Old 16 February 2016, 14:13   #141
Retro-Nerd
Missile Command Champion

Retro-Nerd's Avatar
 
Join Date: Aug 2005
Location: Germany
Age: 45
Posts: 10,357
Quote:
Originally Posted by Arnie View Post
This happens with my Logitech Cordless Rumblepad 2 when I switch modes.
Then test Midnight Resistance WHDLoad in CD32 pad mode. This one seems to work fine with all emulated CD32 pad buttons. Very strange.
Retro-Nerd is offline  
AdSense AdSense  
Old 16 February 2016, 14:50   #142
spidi
Registered User
 
Join Date: Jan 2014
Location: Wroclaw/Poland
Posts: 91
Quote:
Originally Posted by Retro-Nerd View Post
Ok, got my adapter and flashed the latest Amiga firmware. Results are a mixed bag.

Mouse:

Microsoft wireless mouse 5000 = not detected

Joypads:

Sega Saturn original USB pad from Sega SLS = detected, but only the directions work. None of the buttons.

SNES original pad with Tomee USB adapter = works fine in joystick and gamepad mode but i can't switch to CD32 pad mode.

Mega Drive original 6-Button pad with Retrolink Adapter (2 ports) = detected but not properly. Sometimes the button work but the directions not, or the directions left+up are activated at once permanently.

Logitech Gamepad F310 with cable = works fine in joystick and gamepad mode. I can switch to CD32 pad mode. This works fine in Psygore's joystick test program and with original CD32 games via WHDLoad installed. BUT: The disk games patched for full CD32 pad support in WHDLoad acts mostly strange (tested with Giana Sisters, Slam Tilt, Hybris, Battle Squadron and Flashback. Though Midnight Resistance was fine). The four main buttons seems all the same and running in some kind of autofire. And the games freezes some times completely the machine.

Logitech Dual Action with cable = same like the F310.


Well, i hope you can fix some of this issues with a new firmware. Tell me what infos you need, spidi.

Please download and run this program (for Windows) http://retro.7-bit.pl/download/usbview.exe and result for each device send me.

Then on Windows run Game Controllers (for example Windows XP and Polish )




Assign buttons for numbers and send it to me.
spidi is offline  
Old 16 February 2016, 15:02   #143
Retro-Nerd
Missile Command Champion

Retro-Nerd's Avatar
 
Join Date: Aug 2005
Location: Germany
Age: 45
Posts: 10,357
A little update for the SNES pad+Tomee adapter combo. If i switch with the Logitech to CD32 mode it works for the SNES pad too. So it seems the play/stop buttons aren't mapped for start/select buttons on the SNES pad. The disk patched games for CD32 pad controls works fine then, minus the play button (which is mostly ingame pause).

edit: So i hope this is correct. I start with the SNES pad with USB adapter:

Code:
Device Descriptor:
bcdUSB:             0x0110
bDeviceClass:         0x00
bDeviceSubClass:      0x00
bDeviceProtocol:      0x00
bMaxPacketSize0:      0x08 (8)
idVendor:           0x1D57
idProduct:          0x0020
bcdDevice:          0x0021
iManufacturer:        0x01
0x0409: "SNES PC Game Pad   "
iProduct:             0x02
0x0409: "SNES PC Game Pad   "
iSerialNumber:        0x00
bNumConfigurations:   0x01

ConnectionStatus: DeviceConnected
Current Config Value: 0x01
Device Bus Speed:     Low
Device Address:       0x03
Open Pipes:              1

Endpoint Descriptor:
bEndpointAddress:     0x81  IN
Transfer Type:   Interrupt
wMaxPacketSize:     0x0008 (8)
bInterval:            0x0A

Configuration Descriptor:
wTotalLength:       0x0022
bNumInterfaces:       0x01
bConfigurationValue:  0x01
iConfiguration:       0x00
bmAttributes:         0x80 (Bus Powered )
MaxPower:             0xFA (500 Ma)

Interface Descriptor:
bInterfaceNumber:     0x00
bAlternateSetting:    0x00
bNumEndpoints:        0x01
bInterfaceClass:      0x03 (HID)
bInterfaceSubClass:   0x00
bInterfaceProtocol:   0x00
iInterface:           0x00

HID Descriptor:
bcdHID:             0x0110
bCountryCode:         0x21
bNumDescriptors:      0x01
bDescriptorType:      0x22
wDescriptorLength:  0x005A

Endpoint Descriptor:
bEndpointAddress:     0x81  IN
Transfer Type:   Interrupt
wMaxPacketSize:     0x0008 (8)
bInterval:            0x0A
SNES USB buttons assigned in Windows:

B = Button 1
A = Button 2
Y = Button 3
x = Button 4
Left Shoulder = Button 5
Right Shoulder = Button 6
Select = Button 7
Start = Button 8



Logitech F310 gamepad


Code:
Device Descriptor:
bcdUSB:             0x0200
bDeviceClass:         0x00
bDeviceSubClass:      0x00
bDeviceProtocol:      0x00
bMaxPacketSize0:      0x08 (8)
idVendor:           0x046D (Logitech Inc.)
idProduct:          0xC216
bcdDevice:          0x0414
iManufacturer:        0x01
0x0409: "Logitech"
iProduct:             0x09
0x0409: "Logitech Dual Action"
iSerialNumber:        0x03
0x0409: "C8CA4CA7"
bNumConfigurations:   0x01

ConnectionStatus: DeviceConnected
Current Config Value: 0x01
Device Bus Speed:     Full
Device Address:       0x03
Open Pipes:              2

Endpoint Descriptor:
bEndpointAddress:     0x81  IN
Transfer Type:   Interrupt
wMaxPacketSize:     0x0020 (32)
bInterval:            0x04

Endpoint Descriptor:
bEndpointAddress:     0x02  OUT
Transfer Type:   Interrupt
wMaxPacketSize:     0x0020 (32)
bInterval:            0x08

Configuration Descriptor:
wTotalLength:       0x0029
bNumInterfaces:       0x01
bConfigurationValue:  0x01
iConfiguration:       0x00
bmAttributes:         0x80 (Bus Powered )
MaxPower:             0x32 (100 Ma)

Interface Descriptor:
bInterfaceNumber:     0x00
bAlternateSetting:    0x00
bNumEndpoints:        0x02
bInterfaceClass:      0x03 (HID)
bInterfaceSubClass:   0x00
bInterfaceProtocol:   0x00
iInterface:           0x00

HID Descriptor:
bcdHID:             0x0111
bCountryCode:         0x00
bNumDescriptors:      0x01
bDescriptorType:      0x22
wDescriptorLength:  0x0063

Endpoint Descriptor:
bEndpointAddress:     0x81  IN
Transfer Type:   Interrupt
wMaxPacketSize:     0x0020 (32)
bInterval:            0x04

Endpoint Descriptor:
bEndpointAddress:     0x02  OUT
Transfer Type:   Interrupt
wMaxPacketSize:     0x0020 (32)
bInterval:            0x08

Logitech F310 buttons assigned in Windows


X = Button 1
A = Button 2
B = Button 3
Y = Button 4
Left Shoulder = 5
Right Shoulder = 6
Left Trigger = 7
Right Trigger = 8
Back = 9
Start = 10
Left Analog top button = 11
Right Analog top button = 12


Sega Saturn USB pad (original SLS)

Quote:
Device Descriptor:
bcdUSB: 0x0110
bDeviceClass: 0x00
bDeviceSubClass: 0x00
bDeviceProtocol: 0x00
bMaxPacketSize0: 0x08 (8)
idVendor: 0x04B4 (Cypress Semiconductor)
idProduct: 0x010A
bcdDevice: 0x0100
iManufacturer: 0x01
0x0409: "CYPRESS"
iProduct: 0x02
0x0409: "USB Gamepad"
iSerialNumber: 0x00
bNumConfigurations: 0x01

ConnectionStatus: DeviceConnected
Current Config Value: 0x01
Device Bus Speed: Low
Device Address: 0x03
Open Pipes: 1

Endpoint Descriptor:
bEndpointAddress: 0x81 IN
Transfer Type: Interrupt
wMaxPacketSize: 0x0004 (4)
bInterval: 0x08

Configuration Descriptor:
wTotalLength: 0x0022
bNumInterfaces: 0x01
bConfigurationValue: 0x01
iConfiguration: 0x00
bmAttributes: 0x80 (Bus Powered )
MaxPower: 0x32 (100 Ma)

Interface Descriptor:
bInterfaceNumber: 0x00
bAlternateSetting: 0x00
bNumEndpoints: 0x01
bInterfaceClass: 0x03 (HID)
bInterfaceSubClass: 0x00
bInterfaceProtocol: 0x00
iInterface: 0x00

HID Descriptor:
bcdHID: 0x0100
bCountryCode: 0x00
bNumDescriptors: 0x01
bDescriptorType: 0x22
wDescriptorLength: 0x0043

Endpoint Descriptor:
bEndpointAddress: 0x81 IN
Transfer Type: Interrupt
wMaxPacketSize: 0x0004 (4)
bInterval: 0x08
Sega Saturn USB buttons assigned in Windows

A = Button 1
B = Button 2
C = Button 3
X = Button 4
Y = Button 5
Z = Button 6
Left Shoulder = Button 7
Right Shoulder = Button 8
Start = Button 9


Sega Mega Drive original 6-Button+ Retro-Bit Adapter (2 ports, plugged into port 1)

Code:
Device Descriptor:
bcdUSB:             0x0110
bDeviceClass:         0x00
bDeviceSubClass:      0x00
bDeviceProtocol:      0x00
bMaxPacketSize0:      0x08 (8)
idVendor:           0x1292
idProduct:          0x4745
bcdDevice:          0x0100
iManufacturer:        0x01
0x0409: "INNEX"
iProduct:             0x02
0x0409: "GENESIS Controller USB"
iSerialNumber:        0x00
bNumConfigurations:   0x01

ConnectionStatus: DeviceConnected
Current Config Value: 0x01
Device Bus Speed:     Low
Device Address:       0x03
Open Pipes:              1

Endpoint Descriptor:
bEndpointAddress:     0x81  IN
Transfer Type:   Interrupt
wMaxPacketSize:     0x0008 (8)
bInterval:            0x0A

Configuration Descriptor:
wTotalLength:       0x0022
bNumInterfaces:       0x01
bConfigurationValue:  0x01
iConfiguration:       0x04
0x0409: "Cfg1"
bmAttributes:         0x80 (Bus Powered )
MaxPower:             0x96 (300 Ma)

Interface Descriptor:
bInterfaceNumber:     0x00
bAlternateSetting:    0x00
bNumEndpoints:        0x01
bInterfaceClass:      0x03 (HID)
bInterfaceSubClass:   0x00
bInterfaceProtocol:   0x00
iInterface:           0x05

HID Descriptor:
bcdHID:             0x0110
bCountryCode:         0x21
bNumDescriptors:      0x01
bDescriptorType:      0x22
wDescriptorLength:  0x0070

Endpoint Descriptor:
bEndpointAddress:     0x81  IN
Transfer Type:   Interrupt
wMaxPacketSize:     0x0008 (8)
bInterval:            0x0A
Sega Mega Drive USB buttons assigned in Windows

A = Button 1
B = Button 2
C = Button 3
X = Button 4
Y = Button 5
Z = Button 6
Start = Button 7
Mode = Button 8

Last edited by Retro-Nerd; 25 February 2016 at 21:44.
Retro-Nerd is offline  
Old 16 February 2016, 16:49   #144
spidi
Registered User
 
Join Date: Jan 2014
Location: Wroclaw/Poland
Posts: 91
Quote:
Originally Posted by Retro-Nerd View Post
A little update for the SNES pad+Tomee adapter combo. If i switch with the Logitech to CD32 mode it works for the SNES pad too. So it seems the play/stop buttons aren't mapped for start/select buttons on the SNES pad. The disk patched games for CD32 pad controls works fine then, minus the play button (which is mostly ingame pause).

edit: So i hope this is correct. I start with the SNES pad with USB adapter:

...
I sent an e-mail test firmware.
spidi is offline  
Old 16 February 2016, 17:24   #145
Retro-Nerd
Missile Command Champion

Retro-Nerd's Avatar
 
Join Date: Aug 2005
Location: Germany
Age: 45
Posts: 10,357
The SNES pad issue is fixed now. At least i have one perfect CD32 pad replacement for now. Thanks for the new firmware.


About the remaining issues with the other pads. Just replied to your e-mail.
Retro-Nerd is offline  
Old 16 February 2016, 18:11   #146
spidi
Registered User
 
Join Date: Jan 2014
Location: Wroclaw/Poland
Posts: 91
Quote:
Originally Posted by Arnie View Post
This happens with my Logitech Cordless Rumblepad 2 when I switch modes.
In modes "Joystick" or "Pad" R2 and L2 buttons is mapped autofire.
Probably enabled autofire.
spidi is offline  
Old 25 February 2016, 21:28   #147
danko
Registered User
danko's Avatar
 
Join Date: Oct 2009
Location: Italy
Age: 37
Posts: 87
Any news about the compatibility with original PS3 DualShock 3 and original Xbox 360 controller for Windows?
danko is offline  
Old 26 February 2016, 00:01   #148
happymondays
Registered User

 
Join Date: Aug 2014
Location: Szeged
Posts: 108
Wireless Xbox 360 does not work for me, unfortunately. Speedlink SL-6540 (Bullfrog) and SL-6535 (Strike2) both work like a charm.
happymondays is offline  
Old 26 February 2016, 18:18   #149
el_pasi
Registered User

 
Join Date: Sep 2014
Location: Finland
Age: 40
Posts: 74
I just tried WHDLoad-version of Midnight Resistance with Logitech Cordless Rumblepad 2.
CD32-mode had issues, second weapon (blue button) was autofiring all the time, no matter what buttons did I push. Same kind of problems with WHDLoad-Giana Sisters (Giana was jumping all the time). However joystick- and pad-modes worked well.
el_pasi is offline  
Old 26 February 2016, 19:36   #150
Retro-Nerd
Missile Command Champion

Retro-Nerd's Avatar
 
Join Date: Aug 2005
Location: Germany
Age: 45
Posts: 10,357
So, only the SNES pad with USB adapter and maybe the iBuffalo SNES pad clone are at the moment the only pads that are 100% supported with WHDLoad CD32 pad patched disk games (somebody should test original PSX pads with an USB adapter). Normal CD32 games installed with WHDLoad though should work fine with the Logitech pads in CD32 pad mode.

Well, i have still hope for my Sega Saturn USB or Mega Drive 6-button pad though.

Last edited by Retro-Nerd; 26 February 2016 at 19:56.
Retro-Nerd is offline  
Old 27 February 2016, 23:42   #151
danko
Registered User
danko's Avatar
 
Join Date: Oct 2009
Location: Italy
Age: 37
Posts: 87
Have a Xbox one controller connect with usb cable not work
danko is offline  
Old 28 February 2016, 00:13   #152
spidi
Registered User
 
Join Date: Jan 2014
Location: Wroclaw/Poland
Posts: 91
Quote:
Originally Posted by danko View Post
Have a Xbox one controller connect with usb cable not work
XBox controller is not HID devices.
spidi is offline  
Old 28 February 2016, 00:14   #153
danko
Registered User
danko's Avatar
 
Join Date: Oct 2009
Location: Italy
Age: 37
Posts: 87
Xbox 360 and dualshock 3 controller is not compatible?
danko is offline  
Old 28 February 2016, 01:08   #154
spidi
Registered User
 
Join Date: Jan 2014
Location: Wroclaw/Poland
Posts: 91
Quote:
Originally Posted by danko View Post
Xbox 360 and dualshock 3 controller is not compatible?
Yes.

I'm working on a special driver.
spidi is offline  
Old 04 March 2016, 22:26   #155
Methanoid
Retired Quartex Sysop
Methanoid's Avatar
 
Join Date: Sep 2001
Location: Roman Verulamium
Age: 51
Posts: 1,586
Amigakit website says

support for mouses using both USB HID and USB-PS/2,
support for USB HID joysticks,
support for USB HID pads,
support for both USB HID and USB-PS/2 keyboards,

Is there any way to connect mouse, keyboard and joystick to USB on this at same time? Presumably have to add a hub?
Methanoid is offline  
Old 05 May 2016, 23:16   #156
jarp
Registered User

 
Join Date: Apr 2016
Location: Helsinki / Finland
Posts: 150
Quote:
Originally Posted by Methanoid View Post
Amigakit website says

support for mouses using both USB HID and USB-PS/2,
support for USB HID joysticks,
support for USB HID pads,
support for both USB HID and USB-PS/2 keyboards,

Is there any way to connect mouse, keyboard and joystick to USB on this at same time? Presumably have to add a hub?
No, while USB protocol supports it, Amiga does not and what this adapter does is converting USB protocol to Amiga protocol I bought two Rys MKII adapters and one Sum keyboard adapter to get everything work wireless.

But I just noticed that after upgrading firmware to 20160221 auto-fire no longer works on my Logitech F710 wireless pad (when I enable auto-fire, nothing happens but ordinary fire does not work either). I downgraded to 20160103 and no problems.
jarp is offline  
Old 06 May 2016, 01:23   #157
spidi
Registered User
 
Join Date: Jan 2014
Location: Wroclaw/Poland
Posts: 91
Quote:
Originally Posted by Methanoid View Post
Amigakit website says

support for mouses using both USB HID and USB-PS/2,
support for USB HID joysticks,
support for USB HID pads,
support for both USB HID and USB-PS/2 keyboards,

Is there any way to connect mouse, keyboard and joystick to USB on this at same time? Presumably have to add a hub?
RyśMKII does not support the HUB.
spidi is offline  
Old 08 May 2016, 13:08   #158
Jope
-
Jope's Avatar
 
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 36
Posts: 5,935
Send a message via Skype™ to Jope
Hey, how about us KVM or wireless desktop users..

Are you guys planning to devise an adapter that accepts devices that perform as a keyboard and mouse from a single USB connection?
Jope is offline  
Old 08 May 2016, 14:52   #159
spudje
Registered User

 
Join Date: Dec 2014
Location: Netherlands
Posts: 398
So that would be a combined SUM and Rys? Connecting to both keyboard and db9 and ending in 1 USB?
spudje is offline  
Old 08 May 2016, 16:04   #160
TuKo
Apollo Team

TuKo's Avatar
 
Join Date: May 2014
Location: Switzerland
Posts: 157
Hi,

Mouse speed adjustment is not working with latest firmware, which one has it working ?

Thanks in advance
TuKo is offline  
AdSense AdSense  
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Amiga USB Mouse Adapter Amigan123 MarketPlace 35 18 March 2015 06:24
Dual Amiga joystick USB adapter sidchip Retrogaming General Discussion 0 19 January 2014 20:51
Amiga Joystick to USB Adapter Cable amigakit.com MarketPlace 21 16 July 2011 11:53
WTB: Amiga Joystick to USB Adapter mr.niceguy MarketPlace 9 20 February 2010 18:16
Amiga Joystick > USB adapter. Smiley Hardware pics 10 16 September 2009 18:11

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 21:37.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Page generated in 0.29019 seconds with 11 queries