Blizzard 1230 issues

desantii · 01 July 2011, 16:10

Hi, I recently bought a Blizzard 1230 MK IV and now having several issues leading me to think the Blizzard is bad. First of all I have tried several ram sticks (EDO and FPM), swapped the CPU, used a different power supply and same issues.

When the machine turns on it will start booting and then a Guru software error, then if I reset several times it will get into WB but give Set patch failed or DFO failed or disk is unreadable message. If I keep reseting it will boot and then work great, its almost like it needs to warm up.. Any thoughts

Phantom · 01 July 2011, 16:19

Enter the Early StartUp Menu on your A1200 and check if the board is working under Diagnosis (something like that, I don't remember).

Also ensure that you have plugged the Blizzard firmly, and check the board without any RAM at all.

Did you check the jumpers for the extra RAM?

desantii · 01 July 2011, 16:33

Board appears fine in teh early startup menu.

Set jumpers to both 60 and 70ns.. same issue

Map rom or no map rom... same issue

Again when it finally boots it works fine. When I was runninf AIBB I did see some screen corruption when running the memory benchmark

Loedown · 01 July 2011, 16:58

PSU failing, caps on Blizzard, bad solder joints etc.

Same routine for every bad board unless there's a *hard* fault not intermittant

desantii · 01 July 2011, 17:10

I did try another PSU so definitely not that. I will borrow another A1200 to rule out my machine

Quote:

Originally Posted by Loedown

PSU failing, caps on Blizzard, bad solder joints etc.

Same routine for every bad board unless there's a *hard* fault not intermittant

desantii · 08 July 2011, 16:21

I did try another 1200 and same issue so its definitely a Blizzard issue... aarrjjj

Somtimes gets a Guru error, soemtimes when loading a Setpatch or DHO error.. and eventually it will boot and work

duga · 08 July 2011, 17:22

What kind of PSU are you using? 2.5, 3 och 4.5 ampere @ 5 Volt?

Have you tried the Blizzard without any memory at all?

desantii · 08 July 2011, 17:26

I am using a 4.5A one I also tried an ATX PSU (in a case). I will try without ram

01 July 2011, 16:10	#1
desantii Registered User Join Date: Oct 2009 Location: Oswego, IL Posts: 125	Blizzard 1230 issues Hi, I recently bought a Blizzard 1230 MK IV and now having several issues leading me to think the Blizzard is bad. First of all I have tried several ram sticks (EDO and FPM), swapped the CPU, used a different power supply and same issues. When the machine turns on it will start booting and then a Guru software error, then if I reset several times it will get into WB but give Set patch failed or DFO failed or disk is unreadable message. If I keep reseting it will boot and then work great, its almost like it needs to warm up.. Any thoughts

01 July 2011, 16:19	#2
Phantom Release The Kraken Join Date: Jun 2009 Location: Chania, Hellas Age: 35 Posts: 154	Enter the Early StartUp Menu on your A1200 and check if the board is working under Diagnosis (something like that, I don't remember). Also ensure that you have plugged the Blizzard firmly, and check the board without any RAM at all. Did you check the jumpers for the extra RAM? __________________ AMIGA FUTURE A magazine with future attitude Amiga CD32 FMV * Amiga CDTV DemoScene LR * A1200 Pitch Black * PegasosII G4 AmigaOS 4.1 Update 5

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Apollo 1230-16 Outperforming Blizzard 1230-50??	DonFuego	support.Hardware	17	20 November 2009 20:45
Blizz 1230 Mk4 Issues	moondynejoe	support.Hardware	20	13 January 2009 12:21
Blizzard 1230 II	SkippyAR	support.Hardware	33	01 July 2008 11:33
Blizzard 1230/IV	Eny-	support.Hardware	36	28 June 2004 00:06
Blizzard 1230-IV	rattus	support.Hardware	5	04 March 2003 14:31

01 July 2011, 16:33	#3
desantii Registered User Join Date: Oct 2009 Location: Oswego, IL Posts: 125	Board appears fine in teh early startup menu. Set jumpers to both 60 and 70ns.. same issue Map rom or no map rom... same issue Again when it finally boots it works fine. When I was runninf AIBB I did see some screen corruption when running the memory benchmark

01 July 2011, 16:58	#4
Loedown Precious & fragile things Join Date: Feb 2009 Location: Victoria, Australia Posts: 1,589	PSU failing, caps on Blizzard, bad solder joints etc. Same routine for every bad board unless there's a hard fault not intermittant

08 July 2011, 16:21	#6
desantii Registered User Join Date: Oct 2009 Location: Oswego, IL Posts: 125	I did try another 1200 and same issue so its definitely a Blizzard issue... aarrjjj Somtimes gets a Guru error, soemtimes when loading a Setpatch or DHO error.. and eventually it will boot and work

08 July 2011, 17:22	#7
duga Registered User Join Date: Nov 2010 Location: Uppsala / Sweden Posts: 225	What kind of PSU are you using? 2.5, 3 och 4.5 ampere @ 5 Volt? Have you tried the Blizzard without any memory at all?

08 July 2011, 17:26	#8
desantii Registered User Join Date: Oct 2009 Location: Oswego, IL Posts: 125	I am using a 4.5A one I also tried an ATX PSU (in a case). I will try without ram

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)