English Amiga Board


Go Back   English Amiga Board > Main > Amiga scene

 
 
Thread Tools
Old 11 October 2010, 10:47   #1
hutton80
 
Posts: n/a
Amiga CD32 qustion: autoboot NTSC console in pal mode

Hi guys, I'm newbie.
I have a question. I have a NTSC AmigaCD32 with SX-32. For booting the console in pal mode I have to enter in the bios, using the mouse, every time I switch on the console.

Is there a way for doing this automatically? Sorry, but I didn't find this information on the several CD32 FAQs. Thank You!
 
AdSense AdSense  
Old 11 October 2010, 21:39   #2
th4t1guy
Registered User
th4t1guy's Avatar
 
Join Date: Mar 2002
Location: Kansas City, MO, USA
Posts: 570
AFAIK, there is no way to do this that would be the same as switching to PAL from the boot menu.

However, there are some tricks you can do such as running a program to switch to PAL when booting workbench. If you dig around old threads here, there's a few cases where some people have soldered some bit on the cd32 motherboard and got it to boot up as PAL, although I believe there were a few problems and it was not necessarily truly in PAL mode.

However, if you are running WHDLoad games in workbench, you can set it to run in PAL, and that should be good enough.
th4t1guy is online now  
Old 10 November 2010, 19:55   #3
hutton80
 
Posts: n/a
Problem solved! Thank you.

I found an application called "IDE-fix": if I set, under System->Prefs->IDEfixprefs, Boot Graphics Mode in PAL my NTSC AmigaCD32 boots automatically in PAL mode: very useful!
 
AdSense AdSense  
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Why is NTSC mode so much slower than PAL? mr_a500 support.FS-UAE 3 07 December 2012 20:28
NTSC CD32 and Flatscreen TV (PAL Mode?) atrionfo support.Hardware 1 12 December 2011 20:12
i hear that PAL/NTSC mode is switchable ... NfernalNfluence New to Emulation or Amiga scene 17 25 August 2010 14:11
CD32: NTSC power supply on a PAL console mrleeman support.Hardware 11 27 July 2008 13:36
NTSC as default mode on a PAL Amiga12oo oldpx support.Hardware 31 13 September 2002 21:43

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 17:30.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Page generated in 0.05646 seconds with 12 queries