Need help to re-use my machines

20 July 2010, 13:12

Hello ,

i have several Amigas around here collected dust for longer time. Now i wish to use it again
but unfortunately all disks are unreadable.
ATM, the most important machines to get running are :
A1200 with Kick 3.0 ( i know i have a set of 3.1 somewhere)
A600 with Kick 2.0
i have also a squirrel PCMCIA-SCSI and a Network-card for PCMCIA.

Because i own the original disks, i'd guess it is not illegal to request a copy of the content
but i wonder how to bring it back. ( internet via linux ).

any hint is welcome.

alexh · 20 July 2010, 15:04

You have two routes :

SCSI

A €5 Adaptec 2940UW PCI SCSI card,
a €1 external SCSI II cable
a €10 external hard drive enclosure
a 50-pin (or 68-pin with adapter) SCSI hard drive

IDE

Any 2.5" PATA (laptop) hard drive
2.5"->3.5" IDE adapter (so you can plug into your PC)

Connect it all up and then format the hard drive & install Workbench 3.0 using E-UAE. If you use FFS (Amiga Fast File System) then you'll be able to mount & read/write your drive in Linux if you add AFFS and Amiga partition support to your Kernel.

There are some restrictions on hard drive size and primary partition size but worry about that once you've got everything together.

20 July 2010, 13:12	#1
obelix Posts: n/a	Need help to re-use my machines Hello , i have several Amigas around here collected dust for longer time. Now i wish to use it again but unfortunately all disks are unreadable. ATM, the most important machines to get running are : A1200 with Kick 3.0 ( i know i have a set of 3.1 somewhere) A600 with Kick 2.0 i have also a squirrel PCMCIA-SCSI and a Network-card for PCMCIA. Because i own the original disks, i'd guess it is not illegal to request a copy of the content but i wonder how to bring it back. ( internet via linux ). any hint is welcome.

20 July 2010, 15:04	#2
alexh Thalion Webshrine Join Date: Jan 2004 Location: Oxford Posts: 10,519	You have two routes : SCSI A €5 Adaptec 2940UW PCI SCSI card, a €1 external SCSI II cable a €10 external hard drive enclosure a 50-pin (or 68-pin with adapter) SCSI hard drive IDE Any 2.5" PATA (laptop) hard drive 2.5"->3.5" IDE adapter (so you can plug into your PC) Connect it all up and then format the hard drive & install Workbench 3.0 using E-UAE. If you use FFS (Amiga Fast File System) then you'll be able to mount & read/write your drive in Linux if you add AFFS and Amiga partition support to your Kernel. There are some restrictions on hard drive size and primary partition size but worry about that once you've got everything together. __________________ Thalion Webshrine Last edited by alexh; 20 July 2010 at 15:11.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DKB Megachip...but which of my machines?	Fingerlickin_B	support.Hardware	29	29 July 2008 22:56
Micro Machines V3	Shatterhand	Retrogaming General Discussion	48	24 July 2003 18:42
Micro Machines	MethodGit	Games images which need to be WHDified	8	02 August 2002 09:10
What were your experiences of these machines?	Bloodwych	Nostalgia & memories	8	12 July 2002 08:17
Micro Machines, 100%?	Akira	request.Old Rare Games	14	28 November 2001 23:16

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)