Indivision 1200 installation problems.

batfatty · 30 June 2009, 11:03

I'm in the process of installing my indivision scan doubler on my 1200. It's the first time I've taken one apart, and I cant figure out how to fit the hard drive back in there.

The scan doubler blocks one of the hard drive's four slots on the mother board, so the hd won't settle in properly. One "leg" rests on the Indivision board.

What am I missing?

Also, should I cut a chunk out of the RF shield, or put some tape on the sd card to prevent a short?

Thanks for your patience, I am an imbecile at this kind of stuff.

Thanks,
Jamey.

Peter · 30 June 2009, 11:24

I have removed my RF Shield completely.
I don't use the Hard Drive caddy inside the A1200 any more.

I use a CF Card Hard Drive and CF IDE adaptor and I have made absolutely sure that any part of it is insulated in case it touches the Indivision - I used good quality electrical insulating tape on the CF Card and adaptor - nothing touches either the Indivision or any other component within the A1200.

I also used a little of the tape on the Indivision cable as well...
This set up has been running like this for ages with no problem.

Photon · 30 June 2009, 14:20

Ahh, tape...! the universal fixer-aller http://thereifixedit.com/wp-content/...-andpplask.jpg

NovaCoder · 01 July 2009, 01:32

Quote:

Originally Posted by batfatty

I'm in the process of installing my indivision scan doubler on my 1200. It's the first time I've taken one apart, and I cant figure out how to fit the hard drive back in there.

The scan doubler blocks one of the hard drive's four slots on the mother board, so the hd won't settle in properly. One "leg" rests on the Indivision board.

What am I missing?

Also, should I cut a chunk out of the RF shield, or put some tape on the sd card to prevent a short?

Thanks for your patience, I am an imbecile at this kind of stuff.

Thanks,
Jamey.

Hiya,

Fitting the Indivision in a 1200 case is not quite as easy as it should be, first off it is better if you 'lose' your 2.5/3.5" HD, the HD mount and the upper RF shield.

What you need is a CF card as a HD, this free's up some much needed room and also has other benefits.

See this thread for one possible mounting solution.

Have fun

lugosi · 02 July 2009, 00:26

I don't know where I saw that thread, but somebody had ordered an A1200 HD from AmigaKit (I think?) with the Indivision pre-installed. Their solution was to leave the HD-cradle (and the metal-shielding) completely away and to screw the HD to the plastic above the connectors on the back of the Miggy.

FOL · 02 July 2009, 19:23

Quote:

Originally Posted by lugosi

I don't know where I saw that thread, but somebody had ordered an A1200 HD from AmigaKit (I think?) with the Indivision pre-installed. Their solution was to leave the HD-cradle (and the metal-shielding) completely away and to screw the HD to the plastic above the connectors on the back of the Miggy.

Indeed, it works very well. We have to drill 2 extra holes and then use them for the HDD. Obviously you will need some type of insolation, to stop the drive shorting out against the lower half of RF shield.

Anemos · 02 July 2009, 22:04

oh you drilling the Amigas M/bs? :O
keep the powder on the special cases..

FOL · 03 July 2009, 00:03

Quote:

Originally Posted by Anemos

oh you drilling the Amigas M/bs? :O
keep the powder on the special cases..

Anemos, NO!!!!

We DONT drill the Mobo's. lol

30 June 2009, 11:03	#1
batfatty Registered User Join Date: Dec 2007 Location: PORTLAND OREGON Posts: 14	Indivision 1200 installation problems. I'm in the process of installing my indivision scan doubler on my 1200. It's the first time I've taken one apart, and I cant figure out how to fit the hard drive back in there. The scan doubler blocks one of the hard drive's four slots on the mother board, so the hd won't settle in properly. One "leg" rests on the Indivision board. What am I missing? Also, should I cut a chunk out of the RF shield, or put some tape on the sd card to prevent a short? Thanks for your patience, I am an imbecile at this kind of stuff. Thanks, Jamey.

30 June 2009, 11:24	#2
Peter Unemployed & Lovin' it Join Date: Nov 2006 Location: Garden of England Age: 44 Posts: 2,493	I have removed my RF Shield completely. I don't use the Hard Drive caddy inside the A1200 any more. I use a CF Card Hard Drive and CF IDE adaptor and I have made absolutely sure that any part of it is insulated in case it touches the Indivision - I used good quality electrical insulating tape on the CF Card and adaptor - nothing touches either the Indivision or any other component within the A1200. I also used a little of the tape on the Indivision cable as well... This set up has been running like this for ages with no problem. __________________ Help me find the Amiga game called "Scavenge"

30 June 2009, 14:20	#3
Photon Oldskool Demo Coder Join Date: Nov 2004 Location: Hult / Sweden Age: 41 Posts: 3,674	Ahh, tape...! the universal fixer-aller http://thereifixedit.com/wp-content/...-andpplask.jpg __________________ Henrik. Programs Amiga demos, iPhone apps, websites, etc. A1000/512k - A500 2.0/040@28/4M/.5M slowmem/8M/SCSI/CF - A600 portable II 3.1/ACA630/WiFi/CF - 'A1700' 3.1/68060@80/64M/IDE-Fix Express/CF - etc."The difference between PC and Amiga is that 10yo PCs are worth $0. 20yo Amigas are worth a lot, and Amigas that are only 15yo cost a fortune!" If you like Portal 2, try my >> single player and cooperation maps <<

02 July 2009, 22:04	#7
Anemos 70X7 Join Date: Apr 2008 Location: Ἑλλάς Posts: 1,012	oh you drilling the Amigas M/bs? :O keep the powder on the special cases.. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Do you have an Indivision AGA 1200 ?	Peter	support.Hardware	41	26 June 2009 17:11
Indivision AGA 1200 WB problem	Chris1965	support.Hardware	9	09 March 2009 21:31
A Most Bizzare Indivision AGA 1200 Problem	Fingerlickin_B	support.Hardware	7	03 March 2009 00:54
For Sale: Indivision AGA 1200 scandoubler/flickerfixer	keropi	MarketPlace	2	24 November 2008 07:27
Indivision AGA 1200 + Elbox PC-Key fix!	Fingerlickin_B	Hardware mods	10	24 September 2008 00:59

02 July 2009, 00:26	#5
lugosi Registered User Join Date: Jun 2009 Location: Germany Posts: 22	I don't know where I saw that thread, but somebody had ordered an A1200 HD from AmigaKit (I think?) with the Indivision pre-installed. Their solution was to leave the HD-cradle (and the metal-shielding) completely away and to screw the HD to the plastic above the connectors on the back of the Miggy.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)