Philips CM 8833 Colour Monitor Mk 2

[frank_b]

Hi. I recently managed to get ahold of an old Philips CM 8833 Colour Monitor Mk2 from someone. I had the previous model but unfortunately it died of old age. The older one has a scart socket but the new one has a VGA (CGA?) like RGB connector on it. At the moment I'm limited to using composite which isn't very good. Does anyone know of a place where I could get a connector to scart or a custom lead for it? A connector would be ideal. I could use it for my STe too.

Thanks in advance,
Frank

[danhans]

Theres one on ebay at the moment that airey is selling for that would do the job

see here http://cgi.ebay.co.uk/Amiga-RGB-to-m...3A1%7C294%3A50

or the pinouts are :-

Pin   Description
2 R   Red 
3 G   Green 
4 B   Blue 
5 I   Intensity 
6 GND   Signal Ground 
7 HSYNC/CSYNC   Horizontal or Composite Sync 
8 VSYNC   Vertical Sync 

[frank_b]

Originally Posted by danhans

Theres one on ebay at the moment that airey is selling for that would do the job

see here http://cgi.ebay.co.uk/Amiga-RGB-to-m...3A1%7C294%3A50

or the pinouts are :-

Pin   Description
2 R   Red 
3 G   Green 
4 B   Blue 
5 I   Intensity 
6 GND   Signal Ground 
7 HSYNC/CSYNC   Horizontal or Composite Sync 
8 VSYNC   Vertical Sync 

Fantastic. Thanks for pointing that out! Problem solved