|04 May 2009, 02:37||#1|
Join Date: Feb 2009
Location: Oregon, USA
HELP! CD to IDE Through SCSI to IDE (IDSC21-E) ON A2091
I'm trying to get a CF to IDE Card Connected to my SCSI to IDE to work on My A2091. Any ideas? It shows the Drive as an Unknown Drive in HDtoolbox. but I don't know how to make it accept it as a drive for formating and booting. I keep getting a "not a type 3 drive" error.
Is the mistake on the settings for the SCSI to IDE? or is there a some drive parameters I need to put in to the drive types?
I'm using a kingston 4gb SD card in the CF to IDE adapter.
Sal Esquivel (kjmann)
|04 May 2009, 07:54||#2|
Join Date: Aug 2001
This error means HDToolbox thinks the drive isn't fixed type (most likely it is reported as removable, type 7).
There should be patch in Aminet to fix this HDToolbox issue. Perhaps HDInsttools also works.
|Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)|
|Thread||Thread Starter||Forum||Replies||Last Post|
|FS: Acard IDE/SCSI-UW Adapter Bridge||ag_woodward||MarketPlace||0||23 January 2009 17:03|
|Attn: those of you with A-Card SCSI>IDE||Paul_s||Hardware mods||11||13 January 2009 23:12|
|SCSI-IDE bridge + IDE to CF adapter - How can I make a backup?||Tuffy||New to Emulation or Amiga scene||2||02 April 2008 21:14|
|Different Acard SCSI-IDE/SATA adapters||Calgor||support.Hardware||25||11 December 2007 15:02|
|No more 30sec IDE delay on a scsi A4000 ...||keropi||Hardware pics||2||11 October 2006 13:02|