winuae, hard drive emulation and savestates

Gaula92 · 07 February 2009, 13:44

Hello there!

I'm on WinUAE (as in "on drugs" :P) 1.5.3 and I'm a boot-time hater. I love the boot time in my real A1200, but windowsXP takes all the boot-time patience from me already, so I need to skip the emulated A1200 boot time.

So there I went with savestates: I made a savestate of my wb running after booting, and life seemed to be getting better: I was very wrong however...

When I load the state at emulation startup (-s statefile=...) my hdf image is inserted and everything but it doesn't work anymore.
I've read elsewere that WINUAE does NOT support savestates with hard drive emulation: is that stil true, Toni? Are you planning to implement that feature or should I look for a new 1-disk lemmings

?

Thanks for souch a GREAT emulator (now running at 50HZ and perfect gfx/sound sync here!!)

TCD · 07 February 2009, 14:02

I think savestates with HD still aren't supported. You can however use the Warp or Turbo mode by pressing 'end' and 'pause' at the same time. Then press the two key again to switch it off again

This should speed up things quite a bit

Toni Wilen · 07 February 2009, 14:05

Harddrives are "supported", there is code that handles this but it isn't 100% compatible. Also make sure all unsupported "expansion" devices are disabled (like bsdsocket, uaeserial,..)

EDIT: "Not working" = try again

Gaula92 · 07 February 2009, 16:47

Thanks!! I will try again and again!

Anyway, I've found the most comfortable way to play A500 games is using ADFS in diskdrive turbo speed and savestates, emulating the original machine configuration instead of emulating a full loaded A1200 and WHDLoad as an abstraction layer...

Toni Wilen · 07 February 2009, 17:15

Try again = better bug report required

At least post logs after loading the statefile.

07 February 2009, 13:44	#1
Gaula92 Registered User Join Date: Aug 2008 Location: Spain Posts: 377	winuae, hard drive emulation and savestates Hello there! I'm on WinUAE (as in "on drugs" :P) 1.5.3 and I'm a boot-time hater. I love the boot time in my real A1200, but windowsXP takes all the boot-time patience from me already, so I need to skip the emulated A1200 boot time. So there I went with savestates: I made a savestate of my wb running after booting, and life seemed to be getting better: I was very wrong however... When I load the state at emulation startup (-s statefile=...) my hdf image is inserted and everything but it doesn't work anymore. I've read elsewere that WINUAE does NOT support savestates with hard drive emulation: is that stil true, Toni? Are you planning to implement that feature or should I look for a new 1-disk lemmings ? Thanks for souch a GREAT emulator (now running at 50HZ and perfect gfx/sound sync here!!)

07 February 2009, 14:02	#2
TCD Moderator Join Date: Sep 2006 Location: Germany Age: 35 Posts: 22,495	I think savestates with HD still aren't supported. You can however use the Warp or Turbo mode by pressing 'end' and 'pause' at the same time. Then press the two key again to switch it off again This should speed up things quite a bit __________________ "I am Polka and that's why I don't like accordions" - CrazyOne, April 2013

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Getting WinUAE to see Compact Flash as hard drive	tonyyeb	support.WinUAE	15	19 August 2008 16:11
WinUAE floppy drive sound emulation	boing_1000	request.UAE Wishlist	3	20 January 2006 21:44
6.4Gb Hard Drive in winuae	pvt_beano	support.WinUAE	2	19 January 2006 10:05
About improving the WinUAE Floppy Drive Sound emulation...	Dr.Venom	request.UAE Wishlist	42	09 November 2005 16:15
Formating a Hard Drive in WinUAE and putting it in a A1200	Peanutuk	support.WinUAE	6	28 April 2004 10:39

07 February 2009, 14:05	#3
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 38 Posts: 11,952	Harddrives are "supported", there is code that handles this but it isn't 100% compatible. Also make sure all unsupported "expansion" devices are disabled (like bsdsocket, uaeserial,..) EDIT: "Not working" = try again

07 February 2009, 16:47	#4
Gaula92 Registered User Join Date: Aug 2008 Location: Spain Posts: 377	Thanks!! I will try again and again! Anyway, I've found the most comfortable way to play A500 games is using ADFS in diskdrive turbo speed and savestates, emulating the original machine configuration instead of emulating a full loaded A1200 and WHDLoad as an abstraction layer...

07 February 2009, 17:15	#5
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 38 Posts: 11,952	Try again = better bug report required At least post logs after loading the statefile.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)