WTB: rgb to 1084 monitor lead

DoogUK · 06 February 2009, 16:57

lead needed from amiga video port to 1084...din type connection.

Yoto · 07 February 2009, 03:23

I have a 1085S, almost new really, used it for a year or so with my A500 then "daddy" bought me a PeeCee, and all went to a plastic bag and stored inside a card box for nearly a 12 years, Also have its cables, a standard power cord and a 23 to 9 pin din connector if im not mistaken.
I can test all the ends and make you a schem if you like.

Yoto · 07 February 2009, 03:27

The cable is really short, 1 meter or less, a custom cable is better imho...

DoogUK · 07 February 2009, 09:39

that would be great

OddbOd · 07 February 2009, 11:32

Quote:

Originally Posted by Yotoxionomai

I have a 1085S....and a 23 to 9 pin din connector if im not mistaken....

I think you are mistaken, every 1085 I have ever seen has a DB9 connector.

@DoogUK: 1084 pinouts, all 3 variants and Amiga video connector pinout.

Yoto · 07 February 2009, 13:53

Yes i checked it, its in fact a Male DB9 connector with only 6 pins ( all five pins on top but only the second of four on bottom)

Just Like this:
_____________
\ 5 4 3 2 1 /
\_9_8_7_6_/

@DoogUK
May this be the variant your looking for?

DoogUK · 07 February 2009, 16:26

no, this is definately a din style.

06 February 2009, 16:57	#1
DoogUK Doogster Join Date: Dec 2007 Location: Dorset Posts: 1,069	WTB: rgb to 1084 monitor lead lead needed from amiga video port to 1084...din type connection. __________________ A1200 PowerTower/Apollo 1260-80mhz/64mb/Voodoo3/SB128/20gb IDE/ClassicWB 3.9 Beta

07 February 2009, 09:39	#4
DoogUK Doogster Join Date: Dec 2007 Location: Dorset Posts: 1,069	that would be great __________________ A1200 PowerTower/Apollo 1260-80mhz/64mb/Voodoo3/SB128/20gb IDE/ClassicWB 3.9 Beta

07 February 2009, 16:26	#7
DoogUK Doogster Join Date: Dec 2007 Location: Dorset Posts: 1,069	no, this is definately a din style. Attached Thumbnails __________________ A1200 PowerTower/Apollo 1260-80mhz/64mb/Voodoo3/SB128/20gb IDE/ClassicWB 3.9 Beta

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB: Monitor Cable for 1084	APFelon	MarketPlace	3	27 May 2007 02:37
WTB: 1084 RGB cable (old round type)	T_hairy_bootson	MarketPlace	7	23 November 2005 00:45
PC to amiga monitor (1084)	Sokar	support.Hardware	12	30 December 2004 00:42
Wanted: RGB Scart lead	Fackamato	MarketPlace	0	04 September 2004 17:28
RGB lead by any chance?	killergorilla	MarketPlace	10	16 August 2004 18:10

07 February 2009, 03:23	#2
Yoto 1 Potato to Spam´em all! Join Date: May 2008 Location: Lost in a Wine Country Age: 37 Posts: 570	I have a 1085S, almost new really, used it for a year or so with my A500 then "daddy" bought me a PeeCee, and all went to a plastic bag and stored inside a card box for nearly a 12 years, Also have its cables, a standard power cord and a 23 to 9 pin din connector if im not mistaken. I can test all the ends and make you a schem if you like.

07 February 2009, 03:27	#3
Yoto 1 Potato to Spam´em all! Join Date: May 2008 Location: Lost in a Wine Country Age: 37 Posts: 570	The cable is really short, 1 meter or less, a custom cable is better imho...

07 February 2009, 13:53	#6
Yoto 1 Potato to Spam´em all! Join Date: May 2008 Location: Lost in a Wine Country Age: 37 Posts: 570	Yes i checked it, its in fact a Male DB9 connector with only 6 pins ( all five pins on top but only the second of four on bottom) Just Like this: _____________ \ 5 4 3 2 1 / \_9_8_7_6_/ @DoogUK May this be the variant your looking for?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)